Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48186 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   751  752  753  754  755  756  757  758  759  760  761  762  763  764  765  766  767  768  769  770  771
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-T9140	Ametek Parts	Ametek Gemco Thermistor 130 C  T9000 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  130 C + or - 5 Degrees  266 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Silicone Coated Braided Fiberglass Sleeving 6 Inches, Blue & Blue Leads  NEMA Class H 200 C Insulation  Grade A (7000V) UL Recognized	-	0	0.00	Call	N/A
AME-T9150	Ametek Parts	Ametek Gemco Thermistor 150 C  T9000 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  150 C + or - 5 Degrees  302 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Silicone Coated Braided Fiberglass Sleeving 6 Inches, Black & Black Leads  NEMA Class H 200 C Insulation  Grade A (7000V) UL Recognized	-	0	0.00	Call	N/A
AME-T9155	Ametek Parts	Ametek Gemco Thermistor 155 C  Part T9155  T9000 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  155 C + or - 5 Degrees  311 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Silicone Coated Braided Fiberglass Sleeving 6 Inches, Blue & Red Leads  NEMA Class H 200 C Insulation  Grade A (7000V) UL Recognized  [Ships in 10 Days]  [Updated 1-19]	-	0	0.00	25.92
AME-T9160	Ametek Parts	Ametek Gemco Thermistor 160 C  T9000 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  160 C + or - 5 Degrees  320 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Silicone Coated Braided Fiberglass Sleeving 6 Inches, Blue & Red Leads  NEMA Class H 200 C Insulation  Grade A (7000V) UL Recognized	-	0	0.00	Call	N/A
AME-T9170	Ametek Parts	Ametek Gemco Thermistor 170 C  T9000 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  170 C + or - 5 Degrees  338 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Silicone Coated Braided Fiberglass Sleeving 6 Inches, White & Green Leads  NEMA Class H 200 C Insulation  Grade A (7000V) UL Recognized	-	0	0.00	Call	N/A
AME-T9180	Ametek Parts	Ametek Gemco Thermistor T9180 190 C  Part T9180  T9000 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  180 C + or - 5 Degrees  356 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Silicone Coated Braided Fiberglass Sleeving 6 Inches, White & Red Leads  NEMA Class H 200 C Insulation  Grade A (7000V) UL Recognized  Ships in  Dated	-	0	0.00	Call	N/A
AME-T9190	Ametek Parts	Ametek Gemco Thermistor 190 C  T9000 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  190 C + or - 5 Degrees  374 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Silicone Coated Braided Fiberglass Sleeving 6 Inches, Black & Gray Leads  NEMA Class H 200 C Insulation  Grade A (7000V) UL Recognized	-	0	0.00	Call	N/A
AME-TD1	Ametek Parts	Ametek Gemco Dial. Timing Dial Labeled for Clock Wise Rotation (<1LB)	-	0	0.00	200.88
AME-TD2	Ametek Parts	Ametek Gemco Dial. Timing Dial Labeled for Counter Clock Wise Rotation (<1LB)	-	0	0.00	200.88
AME-TD3	Ametek Parts	Ametek Gemco Dial. Timing Dial Labeled for Clock Wise Rotation with Vertical Mounting (<1LB)	-	0	0.00	200.88
AME-TD4	Ametek Parts	Ametek Gemco Dial. Timing Dial Labeled for Counter Clock Wise Rotation with Vertical Mounting (<1LB)	-	0	0.00	200.88
AME-TM-1035	Ametek Parts	Ametek Gemco DC Brake 10 "  Part TM-1035  TM1035  Heavy Duty AIST Spring Set Magnetically Released Brake Assembly  Direct Current Clapper Type  10 Inch Wheel Diameter  Voltage DC with Shunt or Series Wound Coils  With Series Coils 200 FT. LBS., 1/2 Hour & 130 FT LBS 1 Hour  With Shunt Coils 200 FT. LBS., 1 Hour & 150 FT LBS 8 Hours  A 10 X 3.75 Inch Brake Wheel is not included  A Rectifier for AC Voltages is available at additional cost  Motor Freight Only  Normally a Stock Item with a Shunt Wound Coil  Normally a Stock Item @ BPI   Ships from Stock to 8 Weeks  Dated 07-2025  (165LBS)	-	0	0.00	9,492.00
AME-TM-1035 COIL	Ametek Parts	Ametek Gemco Brake Coil  For a TM-1035 DC Brake  Shunt or Series Wound  2 per brake, sold each  Dated 01-2024	-	0	0.00	4,264.00
AME-TM-1355	Ametek Parts	Ametek Gemco DC Brake 13 Inch  Part TM-1355  TM1355  Heavy Duty 13 Inch DC Magnetic Brake Assembly  Manufactured to AIST Specifications  Direct Current Clapper Type  13 Inch Wheel Diameter  Voltage DC  With Shunt or Series Wound Coils  Shunt Coils 550 FT. LBS. 1 Hour & 400 Ft Lbs 8 Hours  Series Coils 550 FT. LBS. 1/2 Hour & 365 FT Lbs. 1 Hour  Options available at additional cost Include:  13 Inch Brake Wheel with a Pilot or Finished Bore & Keyway  Secondary Operation via a Hydraulic Slave Cylinder  For progressive brake application from a crane cab  A Rectifier for AC to DC Conversion - Operation  Manual Hand Release Lever  Set or Release Switches to confirm brake status  Ships via Motor Freight Only   Ships in 8 Weeks, Peck MI  Dated 07-2025  (330LBS) Gross H 16" L 26" W 36" Skid	-	0	0.00	13,184.00
AME-TM-1355 COIL	Ametek Parts	Ametek Gemco Brake Coil  For a TM-1355 DC Brake  Shunt or Series Wound  2 per brake, sold each  Dated 01-2024	-	0	0.00	6,185.00
AME-TM-1665	Ametek Parts	Ametek Gemco DC Brake 16 Inch  Part TM-1665  TM1665  Heavy Duty AIST Spring Set Magnetic Release Shoe Brake Assembly  Direct Current Clapper Type  16 Inch Wheel Diameter,  Voltage DC with Shunt or Series Wound Coils  With Series Coils 1000 Ft. Lbs. 1/2 Hour & 650 Ft Lbs. 1 Hour  With Shunt Coils 1000 Ft. Lbs. 1 Hour & 750 Ft Lbs 8 Hours  Coil Part must be identified at time of order.  A 16 X 6.75 Inch Brake Wheel is NOT included  Rectifier for AC Voltages are available at additional cost  Mfg in Peck MI  Ships in 14 to 16 Weeks, Peck MI  Dated 07-2025	-	0	0.00	19,565.00
AME-TM-1665 COIL	Ametek Parts	Ametek Gemco Brake Coil  For a TM-1665 DC Brake  2 per brake, sold each  Shunt or Series Wound  Dated 01-2024  Ships in 5 weeks, Peck MI	-	0	0.00	7,796.00
AME-TM-1985	Ametek Parts	Ametek Gemco Heavy Duty DC Brake  Model TM-1985  aka TM1985  AIST Spring Set Magnetically Released, Shoe Brake Assembly  Direct Current Clapper Type Steel Mill Brake  For AIST Class D, E & F Overhead Cranes  Voltage DC with Shunt or Series Wound Coils, Class "B" Insulation  With Series Coils 2000 FT LBS 1/2 Hour & 1300 FT LBS 1 Hour  With Shunt Coils 2000 FT LBS 1 Hour & 1500 Ft Lbs 8 Hours  A Magnet / Shoe Travel Indicator to facilitates brake adjustment  Twin-magnet coils are Epoxy-encapsulated for  permanent protection against dust, water, grease, oil,  chemicals and mechanical impact  Coils can be replaced while the brake continues to set / under load  Self Aligning Cast Iron Brake Shoes with Bonded Linings for maximum lining wear  Premium Non-Asbestos High Temperature Brake Lining Material   Options available at additional cost include:  A Brake Wheel / Pulley, with a Pilot Bore or with a Finished, Hub Length Bore & Keyway  Rectifiers for AC Voltages, with Enclosure or an Open Chassis Design for mounting in your panel  Brake Enclosures, Designed to meet NEMA 4 or NEMA 3R ratings  A Hand Release Lever, Resistors  Part E019000001 With Shunt Wound Coils  Ships in 12 Weeks, Peck MI  Dated 1-19  Motor Freight Only   Brake Weight 870 LBS Net  Dated 01-2024  (900LBS) H 26" L 42" W 30" Skid / Box	-	0	0.00	40,030.00
AME-TM-1985 COIL	Ametek Parts	Ametek Gemco Brake Coil  For a TM-1985 DC Brake  Shunt or Series Wound  2 per brake, sold each  Consult Factory (Pricing From 2021)  Dated 01-2024	-	0	0.00	12,285.00
AME-TM-2311	Ametek Parts	Ametek Gemco Heavy Duty DC Brake  Model TM-2311  AIST Spring Set Magnetically Released, Shoe Brake Assembly  Direct Current Clapper Style  23 Inch Wheel Diameter  Voltage DC with Shunt or Series Wound Coils  With Series Coils 4000 FT. LBS., 1/2 Hour & 2600 FT. LBS., 1 Hour  With Shunt Coils 4000 FT. LBS., 1 Hour & 3000 FT. LBS., 8 Hours  Available options at additional cost include:  Brake Wheel, Finished or Pilot / Stock Bore  Hand Release Lever, Enclosures, Set & Release Switches  Rectifier for AC Voltages   Ships in 11 to 12 Weeks  Dated 3-2021 CF  Brake Weight 1200 LBS., Net  (1300LBS) H 40" L 50" W 24" Skid / Box	-	0	0.00	47,041.56

Prices are subject to change without notice. Last updated: 17-Aug-2025 06:51:03 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.