Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,169 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,371 part numbers: Motion Control Products     GLEASON 18,098 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,228 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 925 part numbers: Electrical Control Products   HUBBELL 8,289 part numbers: Electrical Control Products     RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48169 part numbers listed in this database. Shown in 2409 pages by 20 items.
Pages:   Prev,   Next,   695  696  697  698  699  700  701  702  703  704  705  706  707  708  709  710  711  712  713  714  715
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-ETH-13 BRAKE ONLY	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	9,795.59
AME-ETH-13 BRAKE ONLY DC	Ametek Parts	Ametek Gemco spring applied, electro-hydraulically released, 13 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 230 Volt DC Shunt Wound Motor.550 FT LBS.	-	0	0.00	12,451.30
AME-ETH-13 BRAKE SYS	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters. System includes: Qty. 1, ET-13H Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	14,897.50
AME-ETH-13 BRAKE SYS DC	Ametek Parts	Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 13 Inch Diameter Brake, 550 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-13 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	17,553.22
AME-ETH-14NA	Ametek Parts	Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). The thruster includes a 230VDC motor. The brake is set up for a 14" diameter wheel which is not included. Two 10797 armored hose kits are included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included	-	0	0.00	11,793.58
AME-ETH-14NA BO	Ametek Parts	Ametek Gemco spring applied, electro-hydraulically released, 14 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 460 / 230 Volt AC motor. 800 FT LBS.	-	0	0.00	11,803.30
AME-ETH-14NA-DC BRAKE ONLY	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 14 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 800 LB FT, 230 Volt DC Motor, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.45 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # (300LBS)	-	0	0.00	14,449.30
AME-ETH-16 BRAKE ONLY	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters 01/11	-	0	0.00	10,907.98
AME-ETH-16 BRAKE ONLY DC	Ametek Parts	Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake.The thruster includes a 230VDC motor. The brake is set up for a 16" diameter wheel which is not included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included.	-	0	0.00	13,092.82
AME-ETH-16 BRAKE SYS DC	Ametek Parts	Ametek Gemco spring applied, electro-hydraulically released brake system with hydraulic actuator for auxiliary manual cab control via foot pedal. 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake. The thruster includes a 230VDC Shunt Wound Motor. The brake is set up for a 16" diameter wheel which is not included. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	19,987.53
AME-ETH-16 BRAKE SYSTEM AC	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	17,835.10
AME-ETH-8 BRAKE SYS DC	Ametek Parts	Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 8 Inch Diameter Brake, 100 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	15,765.82
AME-F000017	Ametek Parts	Ametek Gemco Gasket   Part F000017  aka F17   Copper Gasket  Used with J010160 Armored Hose & Adaptor & Outlet Plugs  Ships from Stock to 2 Weeks  Dated 1-19  (1LB) H 4" L 5" W 4" Box	-	853	0.00	1.72
AME-F000602	Ametek Parts	Ametek Gemco Gasket  Part F000602  aka F000602998 F602  Copper Gasket  Ships from BPI Stock  Dated 01-2024  (1LB) H 4" L 5" W 4" Box	-	8	0.00	15.00
AME-F000603	Ametek Parts	Ametek Gemco Gasket  Part F000603  aka F000603998 F603  Copper Gasket  Ships from BPI Stock  Dated 01-2024  (1LB) H 4" L 5" W 4" Box	-	15	0.00	15.00
AME-F000673	Ametek Parts	Ametek Gemco Bolt   Part F000673  Bolt For Swivel Fitting  aka F000673999  Dated 01-2024  (1LB) H 4" L 5" W 4" Box	-	8	0.00	32.00
AME-F000996	Ametek Parts	Ametek Gemco Plug  Part F000996  aka F000996999 F996  Adaptor Outlet Plug  Dated 01-2023  For Plugging Actuators & Control Cylinders  Used with F00017 Gasket & F006446 Bleeder   Which are sold separately  Ships from Stock  Dated 01-2021  (1LB) H 4" L 5" W 4" Box	-	106	0.00	36.00
AME-F002395	Ametek Parts	Ametek Gemco Boot  Part F002395  Actuator Boot  For Brake Actuating / Slave Cylinders  J007905, J023437 & J008765  Item 11  Dated 01-2024  (1LB) H 4" L 8" W 4" Box	-	17	0.00	56.00
AME-F003163	Ametek Parts	Ametek Gemco Swivel Fitting  OBSOLETE, No longer Available  For an HM Control Panel  Was Item 4, Qty 2 per panel  Attached to the Solenoid Check Valve	-	0	0.00	Call	N/A
AME-F004481	Ametek Parts	Ametek Gemco Fitting  Part F004481  Brass Fitting / Plug  For a J98274 & J98275 Disc Brake Power Cluster  Dated 9/18  (1LB) H 4" L 5" W 4" Box	-	4	0.00	22.91

Prices are subject to change without notice. Last updated: 03-Nov-2025 07:07:31 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.