Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48186 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   695  696  697  698  699  700  701  702  703  704  705  706  707  708  709  710  711  712  713  714  715
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-ECPT10-C-G-0500-03-B00-4	Ametek Parts	Ametek USG PMT Pressure Sensor  ECPT10-C-G-0500-03-D00-4  ECPT10 = Series Pressure Transducer  C = 0 - 5 Volt (3 Wire) Output  G = Gauge  0500 = 0 to 0500 PSI Pressure Range  03 = 1/4 Inch NPT Male Pressure Port Connection  B00 = 3 Pin Packard Connection  4 = +/- 1% Accuracy  9/15  (1LBS) H 4" L 4" W 5"  [Amazon]	-	0	0.00	178.20
AME-ECPT10-C-G-0500-03-D00-4	Ametek Parts	Ametek USG PMT Pressure Sensor  ECPT10-C-G-0500-03-D00-4  ECPT10 = Series Pressure Transducer  C = 0 - 5 Volt (3 Wire) Output  G = Gauge  0500 = 0 to 500 PSI Pressure Range  03 = 1/4 Inch NPT Male Pressure Port Connection  D00 = 3 pin Packard Electrical Connection  4 = +/- 1% Accuracy  9/15  (1LBS) H 4" L 4" W 5"  [Amazon]	-	0	0.00	178.20
AME-ECPT10-CL	Ametek Parts	Ametek USG 02 Cleaned Option	-	0	0.00	51.57
AME-ENCLOSURE	Ametek Parts	Ametek Gemco Enclosure. NEMA 3R Brake Enclosure	-	0	0.00	Call	N/A
AME-ENCLOSURE CB110 NEMA 4	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-110 NEMA 4  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	2,301.48
AME-ENCLOSURE CB15 NEMA 4	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-15 NEMA 4  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,026.00
AME-ENCLOSURE CB160 NEMA 4	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-160 NEMA 4  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	2,622.24
AME-ENCLOSURE CB35 NEMA 4	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-35 NEMA 4  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,126.44
AME-ENCLOSURE CB75 NEMA 3	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-75 NEMA 3  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	740.88
AME-ENCLOSURE CB75 NEMA 4	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-75 NEMA 4  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,230.12
AME-ENCLOSURE ET-8	Ametek Parts	Ametek Gemco Enclosure. NEMA 3R Enclosure for a ET-8 Brake Assembly. Specifically 8210-8-4-A-S-X-X-N-I	-	0	0.00	3,927.95
AME-ENCLOSURE NEMA 12	Ametek Parts	Ametek Gemco Enclosure. NEMA 12 Enclosure for all AHM Panels. 36 X 48 Inches	-	0	0.00	Call	N/A
AME-ENCLOSURE TM-1355	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TM-1355 NEMA 3R  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,420.20
AME-ENCLOSURE TM-1665 NEMA 4	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TM-1655 NEMA 4  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	6,847.20
AME-ENCLOSURE TM1985	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TM-1955 NEMA 4  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	Call	N/A
AME-ENCLOSURE TM83	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TM-83 NEMA 3R  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	854.28
AME-ENCLOSURE TMSC-1035	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TMSC-1035 NEMA 3R  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,193.40
AME-ENCLOSURE TMSC-1355	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TMSC-1355 NEMA 3R  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,420.20
AME-ENCLOSURE TMSC-1665	Ametek Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TMSC-1655 NEMA 4  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	6,847.20
AME-ET-10	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-10  10 Inch Diameter Brake  Manufactured to AIST Specifications  200 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.3 to 7.3 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 10 X 3.75 Inch, Finished or Pilot Bore Part E010500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships via Motor Freight Only   150 LBS Net, 180 LBS Gross  Ships in 8 to 10 Weeks  Dated 01-2023	-	0	0.00	7,383.00

Prices are subject to change without notice. Last updated: 17-Aug-2025 06:51:03 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.