Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,160 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,370 part numbers: Motion Control Products     GLEASON 18,099 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,228 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 925 part numbers: Electrical Control Products   HUBBELL 8,289 part numbers: Electrical Control Products     RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48159 part numbers listed in this database. Shown in 2409 pages by 20 items.
Pages:   Prev,   Next,   694  695  696  697  698  699  700  701  702  703  704  705  706  707  708  709  710  711  712  713  714
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-ET-16DC	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-16  16 Inch Diameter Brake  Manufactured to AIST Specifications  1000 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.45 Seconds  With Adjustable Valve 0.8 to 3.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 16 X 6.75 Inch, Finished or Pilot Bore Part E016500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  400 LBS Net, 430 LBS Gross  Ships via Motor Freight Only	-	0	0.00	12,736.42
AME-ET-18NA	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-18NA  18 Inch Diameter Brake  1500 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  580 LBS Net, 610 LBS Gross  Ships via Motor Freight Only   Dated 06-2022	-	0	0.00	15,949.00
AME-ET-18NA DC	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-18NADC  18 Inch Diameter Brake  1500 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  580 LBS Net, 610 LBS Gross  Ships via Motor Freight Only	-	0	0.00	15,221.50
AME-ET-19	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-19  19 Inch Diameter Brake  Manufactured to AIST Specifications  2000 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  640 LBS Net, 670 LBS Gross  Ships via Motor Freight Only	-	0	0.00	15,275.52
AME-ET-19NA	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-19NA  19 Inch Diameter Brake  1600 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC is required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  640 LBS Net, 670 LBS Gross  Ships via Motor Freight Only  Pricing on request	-	0	0.00	Call	N/A
AME-ET-6NA	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-6NA  6 Inch Diameter Brake  60 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 6 X 3.125, Finished or Pilot Bore Part E006500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships in 6 Weeks  Dated 06-2022  Ships via Motor Freight Only   120 LBS Net, 150 LBS Gross	-	1	0.00	5,201.00
AME-ET-8	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly  Part ET-8  8 Inch Diameter Brake  Manufactured to AIST Specifications  100 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships from Stock to 5 Weeks  Motor Freight Only  140 LBS Net, 170 LBS Gross  Dated 1-2020	-	1	0.00	5,282.28
AME-ET-8DC	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly   Part ET-8DC  Manufactured to AIST Specifications  8 Inch Diameter Brake  100 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  140 LBS Net, 170 LBS Gross  Ships via Motor Freight Only  Dated 1/18	-	0	0.00	7,850.52
AME-ET-8NA	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly  Part ET-8NA  8 Inch Diameter Brake  160 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships via Motor Freight Only   140 LBS Net, 170 LBS Gross  Ship in 6 to 8 Weeks, Peck MI  Dated 06-2022	-	3	0.00	5,660.00
AME-ETH-08 BRAKE ONLY	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 100 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters	-	0	0.00	7,159.31
AME-ETH-08NA BRAKE ONLY	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 160 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters	-	0	0.00	7,159.31
AME-ETH-08NA-DC BRAKE ONLY	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 160 LB FT, 230 Volt DC Motor, Built to AISE Specifications with the exception of the brake torque which is 60 FT LB higher than AISE specifies, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 1.1 Sec. With Adjusting Valve 1.5 to 7.2 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application (165LBS) Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	9,404.63
AME-ETH-08NA-DC SYSTEM	Ametek Parts	Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	14,860.78
AME-ETH-10 1 BRKSYS AC	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 200 Ft LB, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. System includes: Qty. 1, ETH-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	13,197.58
AME-ETH-10 2 BRKSYS DC	Ametek Parts	Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	26,809.88
AME-ETH-10 BRAKE ONLY	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake, 200 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 150 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters	-	0	0.00	11,695.00
AME-ETH-10 BRAKE SYS DC	Ametek Parts	Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	15,853.30
AME-ETH-10-DC BRAKE ONLY	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 200 LB FT, 230 Volt DC Motor, Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # 82300014 (165LBS)	-	0	0.00	10,475.99
AME-ETH-11 BRAKE ONLY	Ametek Parts	400 FT LBS  Dated 1/18	-	0	0.00	10,378.80
AME-ETH-13 BRAKE ONLY	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	9,795.59

Prices are subject to change without notice. Last updated: 25-Oct-2025 07:00:44 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.