Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48186 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   671  672  673  674  675  676  677  678  679  680  681  682  683  684  685  686  687  688  689  690  691
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-E006065	Ametek Parts	Ametek Gemco Eye Bolt  Dated 01-2024	-	0	0.00	292.00
AME-E006066	Ametek Parts	Ametek Gemco Pin  Part E006066  aka E006066006  For a 6 Inch TM-63 DC Brake  Dated 01-2024	-	0	0.00	127.00
AME-E006067	Ametek Parts	Ametek Gemco Mounting Block  Part E006067  aka E006067999  For a 6 Inch TM-63 DC Brake  Dated 01-2024	-	0	0.00	303.00
AME-E006068	Ametek Parts	Ametek Gemco Mounting Block  part E006068  aka E006068999  For a 6 Inch TM-63 DC Brake  Dated 01-2024	-	0	0.00	292.00
AME-E006069	Ametek Parts	Ametek Gemco Block on the Magnet End  For a TM-63 DC Brake   aka 318B788H09  (1LBS) H 4.00" L 4.00" W 4.00"  Dated 01-2024	-	1	0.00	408.00
AME-E006070	Ametek Parts	Ametek Gemco Brake Part TM-63  Part AME-E006070  Wheel End Hinge Block  For a TM-63 Brake  Item 12, 1 per brake  aka 318B787H09  Dated 01-2024  (2LBS) H 6" L 6" W 4" Box	-	0	0.00	317.00
AME-E006073	Ametek Parts	Ametek Gemco Coil  Part E006073  Series Wound Brake Coil  For a 6 Inch TM-63 DC Brake  Item 26, 1 per brake  Coil AMPS 42  Coil Resistance 0.121  Dated 7/18  (16LBS)	-	0	0.00	1,648.08
AME-E006079	Ametek Parts	Ametek Gemco Coil  Part E006079  Series Wound Brake Coil  For a 6 Inch TM-63 DC Brake  Item 26, 1 per brake  aka 645C173G20  Dated 7/18  (16LBS)	-	0	0.00	1,648.08
AME-E006083	Ametek Parts	Ametek Gemco Coil  Part E006083  Series Wound Brake Coil  For a 6 Inch TM-63 DC Brake  Item 26, 1 per brake  27.5 AMPS 1 Hour Duty  37.0 AMPS 1/2 Hour Duty  Average Resistance 0 .163 OHMS  aka 645C173G22  Dated 7/18  (16LBS)	-	0	0.00	1,648.08
AME-E006114	Ametek Parts	Ametek Gemco Switch Kit to complete a Brake Engagement Circuit on a TM63 Brake. Includes Switch, Bracket, Hardware & Instructions. Some brake modification is required This single switch can be wired for a normally open or a normally closed circuit allowing this switch to show a engaged or disengaged brake. One or the other not both  Dated 01-2024	-	0	0.00	1,165.00
AME-E006136	Ametek Parts	Ametek Gemco Outer Shoe Block	-	0	0.00	196.56
AME-E006137	Ametek Parts	Ametek Gemco Tie Rod. Populated Tie Rod for a TM-63 DC Brake Assembly	-	0	0.00	Call	N/A
AME-E006500	Ametek Parts	Ametek Gemco Brake Wheel 6 Inch  Part E006500  aka E006500999  Old Part 834D992H15  For the TM-63 DC Brake Assembly  And ET-6NA Thruster Brake  With the Offset Style Hub, Stock Bore  6.00 Inch Brake Wheel Diameter  3.13 Inch Face Width  3.00 Inch Hub Offset  3.50 Inch Hub Length Through Bore  3.25 Inch Hub Diameter  Solid Hub with Bore Center Drilled   2.00 Inch Maximum Recommended Bore  7375 Maximum RPM  Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06  Dated 06-2025  (16LBS) H 5" L 6" W 6" Box	-	10	0.00	1,598.00
AME-E006536	Ametek Parts	Ametek Gemco Brake Wheel 6 Inch Diameter with a finished bore & keyway	-	0	0.00	1,182.00
AME-E007001	Ametek Parts	Ametek Gemco Magnetic Shoe Brake   Part E007001 - CB-75  aka E0070001001  Spring Set / Solenoid Released  7.00 Inch Diameter  230 Volt AC  60 Hz Single Phase  75 FT LB with a Intermittent Duty Cycle  50 FT LB with a Continuous Duty Cycle  Less a 7.00 X 3.25 Inch Brake Wheel E007500  Options include, 115, 230, 460 & 575 Volt  Reliable design with very few parts. Simple one point torque adjustment.  Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure.   Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator -  a mark on the plunger indicates when  the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Stock to 4 Weeks to Ship  Dated 07-2025  (60LBS) H 12" L 20" W 8" Box	-	0	0.00	2,536.00
AME-E007002	Ametek Parts	Ametek Gemco Magnetic Shoe Brake   Part E007002 - CB-75  Spring Set / Solenoid Released  7.00 Inch Diameter  460 Volt AC  60 Hz Single Phase  75 FT LB with a Intermittent Duty Cycle  50 FT LB with a Continuous Duty Cycle  Less a 7.00 X 3.25 Inch Brake Wheel E007500  Options include, 230, 115 & 575 Volt  Reliable design with very few parts. Simple one point torque adjustment.  Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure.   Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator -  a mark on the plunger indicates when  the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Stock to 4 Weeks to Ship  Dated 07-2025  (60LBS) H 12" L 20" W 8" Box	-	0	0.00	2,536.00
AME-E007003	Ametek Parts	Ametek Gemco Magnetic Shoe Brake   Part E007003 - CB-75  aka E0070003001  Spring Set / Solenoid Released  7.00 Inch Diameter  575 Volt AC  60 Hz Single Phase  75 FT LB with a Intermittent Duty Cycle  50 FT LB with a Continuous Duty Cycle  Less a 7.00 X 3.25 Inch Brake Wheel E007500  Options include, 230, 115 & 575 Volt  Reliable design with very few parts. Simple one point torque adjustment.  Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure.   Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator -  a mark on the plunger indicates when  the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Stock to 4 Weeks to Ship  Dated 07-2025  (60LBS) H 12" L 20" W 8" Box	-	0	0.00	2,536.00
AME-E007012	Ametek Parts	Ametek Gemco Magnetic Shoe Brake Assembly, Spring Set / Solenoid Released, 7 Inch Diameter, 460 Volt, 60 Hz., Single Phase., 110 FT LB Intermittent Duty , less a 7.00 X 4.25 Inch Brake Wheel, E007012-001 460 Volt, 110 FT LB, Intermittent Duty, 2250C17G13 (60LBS)	-	0	0.00	1,632.96
AME-E007053	Ametek Parts	Ametek Gemco Pin  Part E007053  aka E007053006  Hardened Pin  For a 7 Inch CB75 & CB-110 Brake  Item 14, 3 per brake, sold each  Used with the Brake Shoes  aka 2247C08H07  Dated 01-2024  (2LBS) H 4" L 6" W 4" Box	-	3	0.00	164.00
AME-E007054	Ametek Parts	Ametek Gemco Pin CB75-110  Part E007054  aka E007054006  Old Part 247C08H08  For a CB75 & 110 Brake   Item 8, 1 per brake  Pin Connection of Link & Brake Arm  Dated 01-2024  (1LB)	-	8	0.00	108.00

Prices are subject to change without notice. Last updated: 16-Aug-2025 07:11:01 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.