Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48186 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   667  668  669  670  671  672  673  674  675  676  677  678  679  680  681  682  683  684  685  686  687
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-E004142	Ametek Parts	Ametek Gemco Hinge Block  Magnet End  Part E004142  For a TM-43 DC Brake   Item 1, 1 per Brake  Dated 01-2024	-	0	0.00	419.00
AME-E004143	Ametek Parts	Ametek Gemco Block  Part E004143  aka E004143006  Wheel End Hinge Block  For a 4 Inch TM-43 DC Brake  Item 12, 1 per brake  Old West 318B787H01  Ships in 2 to 3 Weeks  Dated 01-2024	-	1	0.00	317.00
AME-E004145	Ametek Parts	Ametek Gemco Drive Stud  Part E004145  aka old 3279B95H05  C.F. for Pricing  Dated 01-2024	-	0	0.00	Call	N/A
AME-E004146	Ametek Parts	Ametek Gemco Coil  Part E004146  Series Wound Brake Coil  For a 4.5 Inch TM-43 DC Brake  Brake Part E004011  1 per brake  Ships in 5 Weeks, Peck MI  Dated 1-2020	-	0	0.00	1,668.60
AME-E004153	Ametek Parts	Ametek Gemco Coil  Part E004153  Series Wound Brake Coil  For a 4.5 Inch TM-43 DC Brake  32 Amps 1/2 Hour  26.5 Amps 1 Hour  Resistance 0.181 OHMS  1 per brake  Ships in 5 Weeks, Peck MI  Dated 1-2020	-	0	0.00	1,668.60
AME-E004154	Ametek Parts	Ametek Gemco Coil  Part E004154  Series Wound Coil  For a 4 Inch TM-43 DC Brake  26.5 AMPS Intermittent Duty Cycle  0.287 Ohms Resistance  aka G645C545G26  Dated 1-2020  (8LBS)	-	0	0.00	1,668.60
AME-E004167	Ametek Parts	Ametek Gemco Coil  Part E004167  Series Wound Brake Coil  For a 4.5 Inch TM-43 DC Brake  12.5 Amps .5 Hour  10.3 Amps 1 Hour  Resistance 1.18 OHM, average  Item 26, 1 per brake  aka 645C545G23  Ships in 8 Weeks, Peck MI  Dated 06-2022	-	0	0.00	Call	N/A
AME-E004175	Ametek Parts	Ametek Gemco Bushing  Part E004175  aka E004175006  Neoprene Shock Bushing  For CB-15 & CB-35 Brakes  Used with Pin E004055 & E005028 at Top of Link  2 per brake, not shown on the parts list  Ships from Stock to 10 Days  Dated 01-2023  (1LB) H 4" L 5" W 4" Box	-	9	0.00	8.64
AME-E004182	Ametek Parts	Ametek Gemco Coil  Part E004182  Series Wound Coil  For a 4.5 Inch TM-43 DC Brake  0.936 OHM Resistance  14 AMPS / 1/2 Hour  11.5 AMPS / 1 Hour  aka 208C757G16  Ships in 5 weeks, Peck MI  Dated 7/18	-	0	0.00	1,572.48
AME-E004500	Ametek Parts	Ametek Gemco Brake Wheel 4.5 Inch  Part E004500  aka E004500999  For the TM-43 DC Brake Assembly  With the Offset Style Hub  4.50 Inch Wheel Diameter  3.13 Inch Face Width  2.62 Inch Hub Offset  2.00 Inch Hub Length Through Bore  2.75 Inch Hub Diameter  Solid Hub with Bore Center Drilled   1.625 Inch Maximum Recommended Bore  9850 Maximum RPM  Cast from ASTM A 536 Ductile Iron  80-60-03 or 80-55-06  Normally a Stock Item @ BPI  Ships from Stock to 4 Weeks  Dated 01-2025  (6LBS) H 5" L 5" W 5" Box	-	3	0.00	1,501.00
AME-E004517	Ametek Parts	Ametek Gemco Brake Wheel 4.5 Inch  For the TM-43 DC Brake Assembly  With a Finished Offset Style Hub  4.50 Inch Wheel Diameter  3.13 Inch Face Width  2.62 Inch Hub Offset  2.00 Inch Hub Length Through Bore  2.75 Inch Hub Diameter  0.75 Inch Bore Diameter, Straight  0.748 / 0.0749 Bore Tolerance  3/16 X 3/32 Inch Keyway  9850 Maximum RPM  Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06  Part AME-E004517  (6LBS) H 5" L 5" W 5" Box  [Amazon]	-	0	0.00	1,284.01
AME-E004600	Ametek Parts	Ametek Gemco Brake Wheel 4.5 Inch	-	0	0.00	1,234.44
AME-E004800	Ametek Parts	Ametek Gemco Brake Wheel 4.5 Inch  Part E004800  Old Part aka 2247C13H01  For the CB-15 AC Brake Assembly  4.50 Inch Brake Wheel Diameter, Stock Bore  2.75 Inch Face Width  2.64 Inch Hub Offset, when measured from centerline of face  2.20 Inch Hub Length Through Bore  2.75 Inch Hub Diameter  Solid Hub with Bore Center Drilled   1.625 Inch Maximum Recommended Bore  9850 Maximum RPM  Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 10-2021  (6LBS) H 5" L 5" W 5" Box	-	4	0.00	1,272.24
AME-E005000	Ametek Parts	Ametek Gemco Brake  Magnetic Shoe Brake Assembly  Spring Set / Solenoid Released  5.50 Inch Diameter  115 Volt AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts. Simple one point torque adjustment. Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure. Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator - a mark on the plunger indicates when the brake should be adjusted for lining wear. Simple two-point adjustment for lining wear  Dated 7/18  (34LBS) H 9.43" L 14.13" W 5.70"	-	0	0.00	1,209.60
AME-E005001	Ametek Parts	Ametek Gemco Brake  Magnetic Shoe Brake Assembly  Spring Set / Solenoid Released  5.50 Inch Diameter  230 Volt AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts. Simple one point torque adjustment. Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure. Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator - a mark on the plunger indicates when the brake should be adjusted for lining wear. Simple two-point adjustment for lining wear  Dated 7/18  (34LBS) H 9.43" L 14.13" W 5.70"	-	0	0.00	1,209.60
AME-E005002	Ametek Parts	Ametek Gemco CB-35 Solenoid Brake  Part E005002  Magnetic Shoe Brake Assembly  Spring Set - Solenoid Released  5.50 Inch Diameter  460 Volt AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel Part E005500  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid - tested in more than 2 million cycles  Manual brake release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  Simple two-point adjustment for lining wear  Normally a Stock Item @ BPI  Ships from Stock to 5 Weeks  Dated 01-2021  (34LBS) H 10" L 16" W 8" Box	-	0	0.00	1,323.00
AME-E005003	Ametek Parts	Ametek Gemco Brake  Magnetic Shoe Brake Assembly  Spring Set / Solenoid Released  5.50 Inch Diameter  575 Volt AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts. Simple one point torque adjustment. Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure. Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator - a mark on the plunger indicates when the brake should be adjusted for lining wear. Simple two-point adjustment for lining wear  Dated 7/18  (34LBS) H 9.43" L 14.13" W 5.70"	-	0	0.00	1,209.60
AME-E005004	Ametek Parts	Ametek Gemco Brake  Magnetic Shoe Brake Assembly  Spring Set / Solenoid Released  5.50 Inch Diameter  200 Volt AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts. Simple one point torque adjustment. Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure. Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator - a mark on the plunger indicates when the brake should be adjusted for lining wear. Simple two-point adjustment for lining wear  Dated 7/18  (34LBS) H 9.43" L 14.13" W 5.70"	-	0	0.00	1,209.60
AME-E005025	Ametek Parts	Ametek Gemco Nameplate on a CB Brake	-	0	0.00	Call	N/A
AME-E005027	Ametek Parts	Ametek Gemco Pin  Part E005027  For a 5.5 Inch CB-35 AC Brake  Item 14, 3 per brake  Located at the Top & Bottom of the Brake Shoes  aka 2247C08H04  Dated 01-2024  (1LB) H 4" L 5" W 4" Box	-	5	0.00	72.00

Prices are subject to change without notice. Last updated: 16-Aug-2025 07:11:01 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.