Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48186 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   662  663  664  665  666  667  668  669  670  671  672  673  674  675  676  677  678  679  680  681  682
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-C0236200	Ametek Parts	Ametek Gemco Cover  For a 1980-412 Cam Limit Switch 1/12	-	0	0.00	314.79
AME-C0358000	Ametek Parts	Ametek Gemco Bracket  Part AME-C0358000  Side Frame Switch Bracket Stands  For the new Gate Hoist Cams, August 1993  A required update when old style cams are replaced with new cams  2 per cam Box, sold each   [Amazon] Dated 1/17  (2LBS) H 4" L 10" W 4"	-	4	0.00	105.31
AME-C0613100	Ametek Parts	Ametek Gemco Bracket 2006-402   Part C0613100  Old Part C-6131-Bracket  For Right Angle Mount - Bracket, 90 Degrees  For use with 2006 Type "K" 2 Circuit Switch  5.25 Inches Long X 4.875 Wide  Qty. 3, Slots on the Short Angle .406 X .75  Qty 8, Drilled & Taped Holes on the Long Side  10-32, 10 GA. / 0.1345 with Gray Primer  Normally a Stock Item  Ships from Stock to 2 Weeks   Dated 06-2022  (3LBS) H 4" L 6" W 6" Box	-	1	0.00	34.00
AME-C0613200	Ametek Parts	Ametek Gemco Bracket 2006-402  Part C0613200  aka C-6132-B  For Right Angle Mount - Bracket, 90 Degrees  For use with 2006 Type "K" 4 Circuit Switch  Normally a Stock Item  Ships from Stock to 10 Days   Dated 1-2020  (3LBS) H 4" L 6" W 6" Box	-	5	0.00	36.72
AME-C0903400	Ametek Parts	Ametek Gemco Bracket  Part C0903400  Guide Tube Support Bracket  Provided with 950 Mill Duty Housings with Strokes Over 72 Inches  Increases Rigidity of the Housing Assembly  Interference Fit to Housing  Ships in 1 Week, Peck MI  Dated 01-2023	-	0	0.00	54.00
AME-C-6131-B	Ametek Parts	Ametek Gemco Bracket 2006-402   Part C0613100  Old Part C-6131-Bracket  For Right Angle Mount - Bracket, 90 Degrees  For use with 2006 Type "K" 2 Circuit Switch  5.25 Inches Long X 4.875 Wide  Qty. 3, Slots on the Short Angle .406 X .75  Qty 8, Drilled & Taped Holes on the Long Side  10-32, 10 GA. / 0.1345 with Gray Primer  Normally a Stock Item  Ships from Stock to 2 Weeks   Dated 06-2022  (3LBS) H 4" L 6" W 6" Box	-	0	0.00	34.00
AME-C-6132-B	Ametek Parts	Ametek Gemco Bracket  SEE NEW PART C0613200  "L" Shaped Bracket for use with a Type "K" 2006, 4 Circuit Switch  (1LB)	-	0	0.00	32.40
AME-CABLES	Ametek Parts	Ametek Gemco ; Product line: 953N	-	0	0.00	Call	N/A
AME-CAST IRON ENCL	Ametek Parts	Ametek Gemco NEMA 4 Cast Iron Enclosure adder. Only available on NEMA 4 & 7 Switches	-	0	0.00	434.16
AME-CAST IRON OR BRONZE ENCL	Ametek Parts	Ametek Gemco Cast Bronze Enclosure for NEMA 4 2000 Series Worm Gear Limit Switches, adder	-	0	0.00	421.20
AME-CB-110	Ametek Parts	Ametek Gemco Solenoid Brake Assembly CB  Part CB-110  CB110  Spring Set / Solenoid Released  7.00 Inch Diameter  110 - 230 - 460 - 575 Volt AC  60 Hz Single Phase  110 FT LB with a Intermittent Duty Cycle  85 FT LB with a Continuous Duty Cycle  Less a 7.00 X 3.25 Inch Brake Wheel E007500  Options include, 230, 115 & 575 Volt  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid  Tested in more than 2 million operational cycles without electrical failure  Manual Brake Release with hand pressure on the solenoid arm  Solenoid Plunger Travel Indicator  Simple Two-Point adjustment for lining wear  Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Stock to 6 Weeks to Ship  Dated 01-2025  (60LBS) H 12" L 20" W 7" Box	-	0	0.00	4,686.00
AME-CB-15	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part CB-15  CB15  Spring Set / Solenoid Released   4.5 Inch Diameter  Many AC Voltages 460, 230, 115, 575  60 Hz Single Phase  15 FT LB Intermittent Duty Cycle  10 Ft LB Continuous Duty Cycle  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid - tested in more than 2 million operational cycles  Manual brake release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  A mark on the plunger indicates when the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Light Duty Solenoid brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection  Brake Wheel sold separately  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks  Dated 05-2025  (20LBS) H 9" L 12" W 6" Box	-	8	0.00	1,273.00
AME-CB-160	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part CB-160  Spring Set / Solenoid Released   10 Inch Diameter  Many AC Voltages 460, 230, 115, 575  60 Hz Single Phase  160 FT LB Intermittent Duty  125 FT LB Continuous Duty  Less a 10.00 X 4.25 Inch Brake Wheel   Reliable design with very few parts  Simple one point torque adjustment  Rugged Long Life Solenoid  Tested in more than 2 million operational cycles without electrical failure  Manual Brake Release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  A mark on the plunger indicates when the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Options available at additional cost include:  A Brake Wheel, Pilot or Finished Bore, Pilot Bore Part E010800  Brake Enclosures NEMA 3 & 4  Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks  Dated 01-2025  (80LBS) H 16" L 22" W 8" Box	-	3	0.00	9,931.52
AME-CB-35	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part CB-35  CB35  Spring Set / Solenoid Released  5.50 Inch Diameter  Many AC Voltages 460, 230, 115, 575  60 Hz Single Phase  35 FT LB with a Intermittent Duty Cycle  20 FT LB with a Continuous Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid - tested in more than 2 million operational cycles  Manual brake release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  Simple two-point adjustment for lining wear  Is a Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Stock to 6 Weeks to Ship  Dated 01-2025  (34LBS) H 12" L 18" W 14" Box	-	17	0.00	1,655.00
AME-CB-75	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part CB-75  Spring Set / Solenoid Released  7.00 Inch Diameter  Many AC Voltages 460, 230, 115, 575  60 Hz Single Phase  75 FT LB with a Intermittent Duty Cycle  50 FT LB with a Continuous Duty Cycle  Less a 7.00 X 3.25 Inch Brake Wheel E007500  Options include, 230, 115 & 575 Volt  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid  Tested in more than 2 million operational cycles without electrical failure  Manual brake release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  A mark on the plunger indicates when the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks to Ship  Dated 01-2025  (60LBS) H 12" L 20" W 8"	-	0	0.00	2,536.00
AME-CO197500	Ametek Parts	Ametek Gemco Cover. Cover only for a Series 1980 NEMA , 4 to 6 Circuit Cam Box (4LBS)	-	0	0.00	168.48
AME-COIL TM-1035	Ametek Parts	Ametek Gemco Brake Coil  For a 10 Inch TM-1035 DC Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  Stock to 6 weeks, Peck MI  Dated 01-2021  (30LBS)	-	0	0.00	3,613.68
AME-COIL TM-1355	Ametek Parts	Ametek Gemco Brake Coil  For a 13 Inch TM-1355 Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  Ships from Stock to 6 Weeks  Dated 01-2021	-	0	0.00	5,241.24
AME-COIL TM-1665	Ametek Parts	Ametek Gemco Brake Coil  For a 16 Inch TM-1665 DC Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26  2 per brake, sold each  Ships in 6 Weeks, Peck MI  Dated 01-2021	-	0	0.00	6,607.44
AME-COIL TM-1985	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-1985 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each   Dated 01-2021	-	0	0.00	10,707.12

Prices are subject to change without notice. Last updated: 16-Aug-2025 07:11:01 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.