Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,138 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,363 part numbers: Motion Control Products     GLEASON 18,098 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,225 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 925 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48138 part numbers listed in this database. Shown in 2408 pages by 20 items.
Pages:   Prev,   Next,   660  661  662  663  664  665  666  667  668  669  670  671  672  673  674  675  676  677  678  679  680
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-CB-35	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part CB-35  CB35  Spring Set / Solenoid Released  5.50 Inch Diameter  Many AC Voltages 460, 230, 115, 575  60 Hz Single Phase  35 FT LB with a Intermittent Duty Cycle  20 FT LB with a Continuous Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid - tested in more than 2 million operational cycles  Manual brake release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  Simple two-point adjustment for lining wear  Is a Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Stock to 6 Weeks to Ship  Dated 01-2025  (34LBS) H 12" L 18" W 14" Box	-	17	0.00	1,655.00
AME-CB-75	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part CB-75  Spring Set / Solenoid Released  7.00 Inch Diameter  Many AC Voltages 460, 230, 115, 575  60 Hz Single Phase  75 FT LB with a Intermittent Duty Cycle  50 FT LB with a Continuous Duty Cycle  Less a 7.00 X 3.25 Inch Brake Wheel E007500  Options include, 230, 115 & 575 Volt  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid  Tested in more than 2 million operational cycles without electrical failure  Manual brake release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  A mark on the plunger indicates when the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks to Ship  Dated 01-2025  (60LBS) H 12" L 20" W 8"	-	0	0.00	2,536.00
AME-CO197500	Ametek Parts	Ametek Gemco Cover. Cover only for a Series 1980 NEMA , 4 to 6 Circuit Cam Box (4LBS)	-	0	0.00	168.48
AME-COIL TM-1035	Ametek Parts	Ametek Gemco Brake Coil  For a 10 Inch TM-1035 DC Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  Stock to 6 weeks, Peck MI  Dated 01-2021  (30LBS)	-	0	0.00	3,613.68
AME-COIL TM-1355	Ametek Parts	Ametek Gemco Brake Coil  For a 13 Inch TM-1355 Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  Ships from Stock to 6 Weeks  Dated 01-2021	-	0	0.00	5,241.24
AME-COIL TM-1665	Ametek Parts	Ametek Gemco Brake Coil  For a 16 Inch TM-1665 DC Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26  2 per brake, sold each  Ships in 6 Weeks, Peck MI  Dated 01-2021	-	0	0.00	6,607.44
AME-COIL TM-1985	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-1985 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each   Dated 01-2021	-	0	0.00	10,707.12
AME-COIL TM-2311	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-2311 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  (150LBS) 1/17	-	0	0.00	14,019.48
AME-COIL TM-3014	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-3014 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  (280LBS) 1/17	-	0	0.00	17,327.52
AME-COIL TM-43	Ametek Parts	Ametek Gemco Brake Coil TM  For a 4 Inch TM-43 DC Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26, 1 per brake  Ships from Stock to 6 Weeks  Dated 01-2021	-	0	0.00	1,718.28
AME-COIL TM-63	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-63 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 1 per brake  Ships in 5 Weeks  Dated 01-2021	-	0	0.00	1,801.44
AME-COIL TM-83	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-83 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  Dated 01-2021  (25LBS)	-	0	0.00	3,128.76
AME-CONVERSION SYSTEM TYPE H	Ametek Parts	Ametek Gemco A/H-ERC Conversion System for Type H Wagner Hydraulic Brake Systems. Converts a Wagner manual brake system to an Air Over Hydraulic Brake System that can be controlled remotely via an electric circuit. This conversion is for Wagner Hydraulic Brake Systems though other hydraulic brake systems could be suitable for this conversion. (system suitability investigation would be required) The Conversion System Includes: One 3/4 HP Motor Driven Compressor Assembly, One Pre- Piped and Pre-Wired Control Panel, One Two-Way Hydraulic Check Valve, One Installation Kit including all the necessary tubing, fittings & fluid. If the existing brake system does not include a Fluid Reservoir Bleeder, it is required, and is at additional cost. This system requires electrical input of 230 Volt DC or 460 Volt AC, 3 Phase, 60 Hz for the compressor and 115 Volt Control on AC Systems. Please specify AC or DC at time of order. Systems are available with the HM parking option at additional cost.  Ships in 5 week, FOB Peck MI  Dated 1/18	-	0	0.00	23,851.80
AME-CR1095004010	Ametek Parts	Ametek Gemco Resolver see SD0308900	-	0	0.00	Call	N/A
AME-CR41093052	Ametek Parts	Ametek Gemco Resolver see SD0308900	-	0	0.00	Call	N/A
AME-CR41093053	Ametek Parts	Ametek Gemco Resolver see SD0308900	-	0	0.00	Call	N/A
AME-D7010	Ametek Parts	Ametek Gemco Yates Tube. Replacement Tube, H4-F-N3.2X-1.00X1.38XXS13, Rev NS, TM1355	-	0	0.00	121.38
AME-DOCUMENT-LOOK-UP	Ametek Parts	For Ametek Service & Support Manuals go to:    http://www.gemcodirect.com    At the Bottom at the Page on the Right Side, Enter 3 or More Characters of OEM Part Number to obtain all this Information	-	0	0.00	Call	N/A
AME-DT-2RV212-A7	Ametek Parts	Ametek Gemco Switch  Part 04537003  aka DT-2RV212-A7  Used in the 2000-805, 2000-806, 2000-807, 2000-808, 2000-809, 2000-837,  2000-838, 2000-839, 2000-840. 2000-841, 2000-869, 2000-870, 2000-871,  2000-872, 2000,873, 2000-823, 2000-824, 2000-825, 2000-855, 2000,856,   2000,857, 2000-8887, 2000-888, 2000-889  Normally a Stock item @ BPI  Ships from Stock to 2 Weeks  Dated 05-2022  (1LB) H 4" L 5" W 4" Box	-	0	0.00	217.08
AME-E004000	Ametek Parts	Ametek Gemco Brake Assembly TM-43  DC Magnetic Brake Assembly Mfg to AIST Standards  Heavy Duty Spring Set, Magnetic Release Shoe Brake Assembly for Fail-Safe Operation  Direct Current Clapper Type Brake  4.5 Inch Diameter  Provided with a Shunt Wound Coil Part E004051  Designed for 1 or 8 Hour Duty Cycle  80 Volts Intermittent 64 Volts Continuous  25 Ft LBS @ 1 Hour  15 FT LBS @ 8 Hours  Options Available some at additional cost include:  A Brake Wheel 4.500 X 3.125 / Finished or Pilot Bore Part E004500  Series Wound Coil, same cost  AC to DC Rectifiers, Part E010326 with NEMA 4 Enclosure or Part E010326 Open Chassis Design  A Manual Hand Release Lever, latching or non-latching  NEMA 3 and 4 Brake Enclosures  Stock to 4 Weeks to Ship  Product available at Amazon.com and BrakeProducts.com  Dated 7/18  (41LBS) H 15" L 20" W 10" Box	-	0	0.00	2,611.44

Prices are subject to change without notice. Last updated: 30-Aug-2025 06:58:19 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.