Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,139 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,363 part numbers: Motion Control Products     GLEASON 18,098 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,225 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 925 part numbers: Electrical Control Products   HUBBELL 8,286 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48138 part numbers listed in this database. Shown in 2408 pages by 20 items.
Pages:   Prev,   Next,   654  655  656  657  658  659  660  661  662  663  664  665  666  667  668  669  670  671  672  673  674
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-955S-V2-0140	Ametek Parts	Ametek Gemco Linear Displacement Transducer 955S  Part 955S-V2-0140  955SV20140  955S = Smart BRIK Accurate Programmable  Non-Contact LDT  In an economical low profile package  Features Auto-Tuning capability  Analog Output Programmable over the entire active stroke length  Diagnostic LED's for sensing a good magnet signal  V2 = V2 -10 Volt to 10 Volt DC  0140 = 14.0 Inch Active Travel Length  Ships in 6 weeks Peck, MI  Dated 01-2023  (1LB) H 4" L 20" W 4" Cardboard Tube	-	0	0.00	782.00
AME-955S-V2-0180	Ametek Parts	Ametek Gemco Linear Displacement Transducer   Part 955S-V2-0180  aka 955SV20180  955S = Smart BRIK Accurate Programmable  Non-Contact LDT  In an economical low profile package  Features Auto-Tuning capability  Analog Output Programmable over the entire active stroke length  Diagnostic LED's for sensing a good magnet signal  V2 = V2 -10 Volt to 10 Volt DC  0180 = 18.0 Inch Active Travel Length  Dated 01/2023  Ships in 6 weeks Peck, MI  (4LBS)	-	0	0.00	782.00
AME-955S-V2-0450	Ametek Parts	Ametek Gemco Linear Displacement Transducer   Part 955S-V2-0450  955SV20450  955S = Smart BRIK Accurate Programmable  Non-Contact LDT  In an economical low profile package  Features Auto-Tuning capability  Analog Output Programmable over the entire active stroke length  Diagnostic LED's for sensing a good magnet signal  V2 = V2 -10 Volt to 10 Volt DC  0450 = 45.0 Inch Active Travel Length  Dated 01/2023  Ships in 6 weeks Peck, MI  (1LB) H 4" L 52" W 4" Cardboard Tube	-	0	0.00	926.00
AME-955S-V3-0120	Ametek Parts	Ametek Gemco Linear Displacement Transducer 955S  Part 955S-V3-0120  955SV30120  955S Smart BRIK accurate programmable, non-contact, linear displacement transducer  In an economical low profile package  Features auto-tuning capability  An analog output programmable over the entire active stroke length  Diagnostic LED's for sensing a good magnet signal  V3 = 10 to -10 Volts DC  0120 = 12.0 Inch Active Travel Length   Ships in 6 Weeks Peck, MI  Dated 01/2023  (6LBS)	-	0	0.00	782.00
AME-955S-V3-0160	Ametek Parts	Ametek Gemco Linear Displacement Transducer   955S Smart BRIK accurate programmable, non-contact, linear displacement transducer  In an economical low profile package  Features auto-tuning capability  An analog output programmable over the entire active stroke length  Diagnostic LED's for sensing a good magnet signal  Part AME-955S-V3-0160  V3 =   0160 = 16.0 Inch Active Travel Length   Dated 01/2023  Ships in 6 weeks Peck, MI  (4LBS)	-	0	0.00	782.00
AME-955S-V3-0180	Ametek Parts	Ametek Gemco Linear Displacement Transducer 955S  Part 955S-V3-0180  955SV30180  955S Smart BRIK accurate programmable, non-contact, linear displacement transducer  In an economical low profile package  Features auto-tuning capability  An analog output programmable over the entire active stroke length  Diagnostic LED's for sensing a good magnet signal  V3 = 10 to -10 VDC Output  0180 = 18.0 Inch Active Travel Length   Ships in 2 Weeks Peck, MI  Dated 01/2024  (5LBS)	-	0	0.00	1,076.00
AME-955S-V4-0470	Ametek Parts	Ametek Gemco Linear Displacement Transducer 955S  Part 955S-V4-0470  955V40470  955S Smart BRIK Accurate Programmable  Non-Contact, LDT  In an Economical Low Profile package  Features Auto-Tuning Capability  Analog Output Programmable over the entire active stroke length  Diagnostic LED's for sensing the Magnet Signal  V4 = 0 to 5 Volt DC Output  0470 = 47.0 Inch Active Travel Length  Dated 01-2025  Ships in 6 Weeks Peck, MI  (8LBS) H 4" L 56" W 4" Cardboard Tube	-	0	0.00	1,011.00
AME-956A-C4-0090-E	Ametek Parts	Ametek Gemco Linear Displacement Transducer 956A  Part 956A-C4-0090-E  956AC40090E  956A = BLOK LDT Analog Version  C4 = 4 to 20mA Output  0090 = 9 Inch Active Stroke  E = Wet Environment. Electronics sealed to a IP 68 Rating  Input Voltage 13.5 to 30 VDC  Null Zone 3 Inch  Dead Zone 2 Inch   3 Diagnostic LED's  Standard 5 Pin Micro 12mm Euro Connector  CE Approval   IP68 Enclosure  -20 to 70 Degree C  Ships in 2 to 3 Weeks, Peck, MI  Dated 01-2024	-	0	0.00	1,195.00
AME-956A-C4-0130-X	Ametek Parts	Ametek Gemco Linear Displacement Transducer 956A  Part 956A-C4-0130-X  956AC40130X  956A = BLOK LDT Analog Version  C4 = 4 to 20mA Output  0130 = 13 Inch Active Stroke  X = No other options  Input Voltage 13.5 to 30 VDC  Null Zone 3 Inch  Dead Zone 2 Inch   3 Diagnostic LED's  Standard 5 Pin Micro 12mm Euro Connector  CE Approval   IP67 Enclosure  -20 to 70 Degree C  Ships in 2 to 3 Weeks, Peck MI  Dated 01-2024	-	0	0.00	1,156.00
AME-956A-C4-0150-X	Ametek Parts	Ametek Gemco Linear Displacement Transducer 956A  Part 956A-C4-0150-X  956AC40150X  956A = BLOK LDT Analog Version  C4 = 4 to 20mA Output  0150 = 15.0 Inch Active Stroke  X = No other options  Input Voltage 13.5 to 30 VDC  Null Zone 3 Inch  Dead Zone 2 Inch   3 Diagnostic LED's  Standard 5 Pin Micro 12mm Euro Connector  CE Approval   IP67 Enclosure  -20 to 70 Degree C  Ships in 2 to 3 Weeks, Peck MI  Dated 01-2024	-	0	0.00	1,198.00
AME-956A-C4-0220-X	Ametek Parts	Ametek Gemco Linear Displacement Transducer 956A  Part 956A-C4-0220-X  956AC40220X  956A = BLOK LDT Analog Version  C4 = 4 to 20mA Output  0220 = 22.0 Inch Active Stroke  X = No Options - Male Piston 1/4 Inch - 28 Threads  Input Voltage 13.5 to 30 VDC  Null Zone 3 Inch  Dead Zone 2 Inch   3 Diagnostic LED's  Standard 5 Pin Micro 12mm Euro Connector  CE Approval   -20 to 70 Degree C  Ships in 2 to 3 Weeks, Peck MI  Dated 01-2024	-	0	0.00	1,198.00
AME-956A-V0-0050-E	Ametek Parts	Ametek Gemco Linear Displacement Transducer Model 956A-V0-0050-E  956A = BLOK LDT Analog Version  V0 = 0 to 10 VDC Output  0050 = 5 Inch Active Stroke  E = Wet Environment. Electronics sealed to a IP 68 Rating  Input Voltage 13.5 to 30 VDC  Null Zone 3 Inch  Dead Zone 2 Inch   3 Diagnostic LED's  Standard 5 Pin Micro 12mm Euro Connector  CE Approval   IP68 Enclosure  -20 to 70 Degree C	-	0	0.00	891.00
AME-956A-V0-0070-AEST	Ametek Parts	Ametek Gemco Linear Displacement Transducer  Part 956A-V0-0070-AEST  956A = BLOK LDT Analog Version  V0 = 0 to 10 VDC Output  0070 = 7 Inch Active Stroke  A = Tapped Female Piston Rod 1/4"-28  E = Wet Environment, Electronics are Sealed to IP 68 Rating  S = Stainless Steel Front Rod End  T = Stainless Steel Rear Rod End  Input Voltage 13.5 to 30 VDC  Null Zone 3 Inch  Dead Zone 2 Inch   3 Diagnostic LED's  Standard 5 Pin Micro 12mm Euro Connector  CE Approval   IP68 Enclosure  -20 to 70 Degree C	-	0	0.00	970.92
AME-956A-V0-0220-E	Ametek Parts	Ametek Gemco Linear Displacement Transducer Model 956A-V0-0220-E  956A = BLOK LDT Analog Version  V0 = 0 to 10 VDC Output  0220 = 22 Inch Active Stroke  E = Wet Environment. Electronics sealed to a IP 68 Rating  Input Voltage 13.5 to 30 VDC  Null Zone 3 Inch  Dead Zone 2 Inch   3 Diagnostic LED's  Standard 5 Pin Micro 12mm Euro Connector  CE Approval   IP68 Enclosure  -20 to 70 Degree C	-	0	0.00	953.64
AME-956A-V0-0220-X	Ametek Parts	Ametek Gemco Linear Displacement Transducer Model 956A-V0-0220-X  956A = BLOK LDT Analog Version  V0 = 0 to 10 VDC Output  0220 = 22 Inch Active Stroke  X = No Options - Male Piston 1/4 Inch - 28 Threads  Input Voltage 13.5 to 30 VDC  Null Zone 3 Inch  Dead Zone 2 Inch   3 Diagnostic LED's  Standard 5 Pin Micro 12mm Euro Connector  CE Approval   -20 to 70 Degree C	-	0	0.00	894.24
AME-956DQ0050E5000EF7X1NDX	Ametek Parts	Ametek Gemco Linear Distance Transducer 956DQ  Part 956DQ0050E5000EF7X1NDX  956DG BLOK LDT  The Quadrature output 956DQ is designed to send position data directly to a high speed input  with resolutions up to 9,999 cycles per inch  The transducer position is absolute and has a burst mode that sends absolute position  data when the controller initiates an input signal  Re-Homing is not required and the  Zero Position can be reset at any time  Data output is provided in engineering units  Eliminating the need for calibration constant (wire speed) programming  956DQ  0050 = 5.0 Inch Stroke Length  E = Euro 12 Pin, 12mm Connector  5000 = 5000 Cycles per Inch Output Resolution  E = Sinking, typically used with sinking output type  F7 = 250KHz Quadrature Cycle Output Frequency Range  X1 = X1 Quadrature, 1ms update, output mode  N = Non-volatile, retentive, 100,000 Storage cycles maximum  D = Differential RD422 Line Driver, TTL compatible  X = No options, Male Piston 1/4" -28 Threads  Ships in 2 Week, Peck MI  Dated 1-19	-	0	0.00	860.76
AME-956DQ0100E1000TF9X1VDX	Ametek Parts	Ametek Gemco Linear Distance Transducer  956DG BLOK LDT  The quadrature output 956DQ is designed to send position data directly to a high speed input with resolutions up to 9,999 cycles per inch  The transducer position is absolute and has a burst mode that sends absolute position data when the controller initiates an input signal  Re-homing is not required and the zero position can be reset at any time  Data output is provided in engineering units, eliminating the need for calibration constant (wire speed) programming.  956DQ-0100-E-1000-T-F9-X1-V-D-X  0100 = 10.0 Inch Stroke Length  E = Euro 12 Pin, 12 mm Connector  1000 = 1000 Cycles per Inch Output Resolution  T = TTL Level Input  F9 = 1.00MHz Quadrature Cycle Output Frequency Range  X1 = X1 Quadrature, 1ms update, output mode  V = Volatile, non retentive, Zero Output Storage  D = Differential RD422 line driver, TTL compatible  X = No options, Male Piston 1/2 -28 Threads  X = No Options	-	0	0.00	860.76
AME-956DQ0120E1000EF7X1NDF	Ametek Parts	Ametek Gemco Linear Distance Transducer  956DG BLOK LDT  The quadrature output 956DQ is designed to send position data directly to a high speed input with resolutions up to 9,999 cycles per inch  The transducer position is absolute and has a burst mode that sends absolute position data when the controller initiates an input signal  Re-homing is not required and the zero position can be reset at any time  Data output is provided in engineering units, eliminating the need for calibration constant (wire speed) programming.  956DQ-0120-E-1000-E-F7-X1-N-D-X-F  0120 = 12.0 Inch Stroke Length  E = Euro 12 Pin, 12 mm Connector  1000 = 1000 Cycles per Inch Output Resolution  E = Sinking Input, typically used with sourcing output type  F7 = 250 KHz Quadrature Cycle Output Frequency Range  X1 = X1 quadrature, 1ms update, output mode  N = Non-volatile Aero Output Storage, Retentive 100,000 storage cycles maximum  D = Differential RD422 line driver, TTL compatible  X = Male Piston 1/2 -28 Threads   F = Front Metal Rod End, Female	-	0	0.00	908.91
AME-956DQ0120E1000EF7X1NDX	Ametek Parts	Ametek Gemco Linear Distance Transducer  956DG BLOK LDT  The quadrature output 956DQ is designed to send position data directly to a high speed input with resolutions up to 9,999 cycles per inch  The transducer position is absolute and has a burst mode that sends absolute position data when the controller initiates an input signal  Re-homing is not required and the zero position can be reset at any time  Data output is provided in engineering units, eliminating the need for calibration constant (wire speed) programming.  956DQ-0120-E-1000-E-F7-X1-N-D-X  0120 = 12 Inch Stroke Length  E = Euro 12 Pin, 12 mm Connector  1000 = 1000 Cycles per Inch Output Resolution  E = Sinking Input, typically used with sourcing output type  F7 = 250 KHz Quadrature Cycle Output Frequency Range  X1 = X1 quadrature, 1ms update, output mode  N = Non-volatile Aero Output Storage, Retentive 100,000 storage cycles maximum  D = Differential RD422 line driver, TTL compatible	-	0	0.00	860.76
AME-956LC-C4-0118-X	Ametek Parts	Ametek Gemco Linear Distance Transducer  Part AME-956LC-C4-0118-X   956LC = BLOK linear displacement transducers are packaged in an economical piston style package. The sensing element and  electronics are housed in an anodized aluminum housing. The piston assembly moves over the sensing element that determines the  position and converts it to a readable output.  C4 = 4-20ma  0118 = 11.8 Inch Stroke  X = No other options  Dated 1/17	-	0	0.00	642.60

Prices are subject to change without notice. Last updated: 31-Aug-2025 06:58:16 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.