Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48171 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   617  618  619  620  621  622  623  624  625  626  627  628  629  630  631  632  633  634  635  636  637
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-950MD-36A-0B-0C-X-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-36A-0B-0C-X-R  36A = 36 Inch Active Stroke  0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications.The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"	-	0	0.00	2,178.00
AME-950MD-36A-0B-0C-X-X M	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Part 950MD-36.0A-0B-0C-X-X  950MD36.0A0B0CXX  Mill Duty Housing for Linear Displacement Transducers.  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.  The Front mount has a Spherical Rod End by 1/2 Inch.  Is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  36.0A = 36.0 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Ships in 6 to 8 Weeks, Peck MI  Dated 01-2024  (30LBS) H 6" L 46" W 6" Cardboard Tube	-	0	0.00	2,026.36
AME-950MD-37A-0B-0C-C2-X	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-37A-0B-0C-C2-X  aka 950MD37A0B0CC2X  Protects the LDT from physical & environmental damage  The housing and body are manufactured from 304 stainless steel  A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head  The Front mount also has a Spherical Rod End by 1/2 Inch  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  37A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = MS Style Connector and Mate on Side of Housing  X = No other options   Ships in 3 to 4 Weeks  Dated 01-2024  (35LBS) H 6" L 40" W 6" Carboard Tube	-	0	0.00	2,026.36
AME-950MD-38.0A-0B-0C-X-X	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Part 950MD-38.0A-0B-0C-X-X  950MD38.0A0B0CXX  Mill Duty Housing for Linear Displacement Transducers.  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.  The Front mount has a Spherical Rod End by 1/2 Inch.  Is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  38.0A = 38.0 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Ships in 6 to 8 Weeks, Peck MI  Dated 01-2024  (32LBS) H 6" L 56" W 6" Cardboard Tube	-	0	0.00	1,839.39
AME-950MD-38A-0B-0C-B1-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-38A-0B-0C-C2-B1-R  38A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Connector and Mate on side of housing  B1 = Protective Boot - Neoprene Coated Nylon -60 to 250 Degrees F  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"	-	0	0.00	2,333.39
AME-950MD-3A-0B-0CCRF2	Ametek Parts	Ametek Gemco 950MD Housing has been designed to protect the LDT from Physical and Environmental Damage.  Protection from Shock, Vibration, Dust / Debris, Temperature & Corrosives.  The 950MD consists of a 304 Stainless Steel Body, Barrel, Piston, Head and Trunnion Mount Bracket.  The 950MD offers a simple two point mounting scheme that can compensate for lateral and/or horizontal movement of the machine while in operation.  The Front Mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  Mounting Bolts are Provided for both the Trunnion Mount and Rod Ends in either standard steel or Optional Stainless Steel  Model 950MD-3A-0B-0C-CRF2  04A = 4.0 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  CRF2  (10LBS) H 4" L 125" W 4" Box	-	0	0.00	1,581.73
AME-950MD-40A-0B-0C-C3-R-F-L	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-40A-0B-0C-C3-R-F-L  40A = 40.0 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on Side of Housing  R = Rear mount spherical rod end 3/4 Inch   F = Front mount spherical rod end 3/4 Inch  L = Delrin Liner for extended life cycle on longer horizontal applications  Dated 01-2024  (35LBS) H 6" L 48" W 6" Carboard Tube	-	0	0.00	2,672.11
AME-950MD-40A-0B-0C-C3-SB	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-40A-0B-0C-C3-SB  40A = 40 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on the Side of the Housing  SB = 304 Stainless Steel Boot   Dated 01-2024  (35LBS) H 6" L 30" W 6"	-	0	0.00	2,632.11
AME-950MD-40A-0B-0C-C-R-F	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-40A-0B-0C-C-R-F  40A = 40 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C = MS Style Connector and Mate on Side of Housing   R = Rear mount spherical rod end 3/4?  F = Front mount spherical rod end 3/4?  (35LBS) H 6" L 30" W 6"	-	0	0.00	1,661.04
AME-950MD-41.47A-0B-0C-X-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-41.47A-0B-0C-C-R  41.47A = 41.47 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C = MS Style Connector and Mate on Side of Housing  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  Dated 01-2024  (35LBS) H 6" L 30" W 6"	-	0	0.00	2,208.82
AME-950MD-41.5A-0B-0C-X-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-41.5A-0B-0C-X-R  41.5A = Active Stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  Dated 01-2024  (35LBS) H 6" L 30" W 6"	-	0	0.00	2,208.82
AME-950MD-42A-0B-0C-C3-SB	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Part 950MD-42A-0B-0C-C3-SB  950MD42A0B0CC3SB  950MD = Mill Duty Housing for LDT's  42A = 42.0 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on the Side of the Housing  SB = 304 Stainless Steel Boot   Ships in 10 Weeks, Peck MI  Dated 01-2024  (35LBS) H 6" L 50" W 6" Round Cardboard Tube	-	0	0.00	2,643.50
AME-950MD-42A-0B-0C-X-R	Ametek Parts	Ametek Gemco Mill Duty Housing  Part Model 950MD-42A-0B-0C-X-R  950MD = Mill Duty Housing for LDT's  42A = 42.0 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch  Dated 01-2024  (35LBS) H 6" L 52" W 6" Round Cardboard Tube	-	0	0.00	2,211.50
AME-950MD-43A-0B-0C-C3-X	Ametek Parts	Ametek Gemco 950 Mill Duty LDT Housing  Part 950MD-43A-0B-0C-C3-X  aka 950MD43A0B0CC3X  950MD = Protects the LDT from physical & environmental damage  The housing and body are manufactured from 304 stainless steel  43A = 43 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = C3 = 5 Pin, 12mm, Euro Connector on Side of Housing  For 952A / 953A LDT's with Connector Option "S"  X = No Mounting or Extreme Condition Options   Ships in 3 Weeks  Dated 01-2024  (35LBS) H 6" L 52" W 6" Tube	-	5	0.00	2,059.86
AME-950MD-43A-0B-0C-X-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-43A-0B-0C-X-R  43A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  Dated 01-2024  (35LBS) H 6" L 30" W 6"	-	0	0.00	2,216.86
AME-950MD-45.0A-0B-0C-X-X	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Part 950MD-45.0A-0B-0C-X-X  950MD45.0A0B0CXX  Mill Duty Housing for Linear Displacement Transducers.  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.  The Front mount has a Spherical Rod End by 1/2 Inch.  Is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  45.0A = 45.0 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Ships in 6 to 8 Weeks, Peck MI  Dated 01-2024  (32LBS) H 6" L 56" W 6" Cardboard Tube	-	0	0.00	1,878.25
AME-950MD-45A-0B-0C-X-B3-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-45A-0B-0C-X-B3-R  45A = 45 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  B3 = Protective Boot, Teflon Coated Fiberglass, -100F to +500 F  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End, 3/4 Inch I.D.   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"	-	0	0.00	2,372.25
AME-950MD-45A-0B-0C-X-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-45A-0B-0C-X-R  45A = 45 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End, 3/4 Inch I.D.  Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"	-	0	0.00	2,228.25
AME-950MD-46A-0B-0C-X-B1	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-46A-0B-0C-X-B1  46A = 46 Inch Active Stroke  0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F  Protects the LDT for resistance to water and oil.  The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees    (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,510.92
AME-950MD-47.2A-0B-0C-X-B1R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-47.2A-0B-0C-X-BR1  47.2 = 47.244 / 1200 Millimeters Active Stroke  0B = Fully retracted Overstroke 0  0C = Fully extended Overstroke 0  X= Standard 1/2 Inch NPT Conduit Fitting  BR1 = Boot / Protective Boot, neoprene coated nylon -60 to 250 degrees F   R = Rear Mount Spherical Rod End 3/4 Inch   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"	-	0	0.00	2,384.31

Prices are subject to change without notice. Last updated: 15-Aug-2025 02:52:07 PM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.