Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48171 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   354  355  356  357  358  359  360  361  362  363  364  365  366  367  368  369  370  371  372  373  374
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-1995-E-6M-6	Ametek Parts	Ametek Gemco Output Expansion Module 1995  Part 1995-E-6M-6  1995 = For use with a 1995 PLS  E = Expansion Module  Includes:  6M = Qty., 6 Mechanical Relays  S.P.D.T., @ 10 AMP  6 = 6 Foot Cable Assembly Part SD0401200L6 Included  For connection to the PLS  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 1-2021  (2LBS) H 4" L 8" W 5" Box	-	2	0.00	1,227.96
AME-1995-L-6M-P-12A	Ametek Parts	Ametek Gemco Micro Set Programmable Limit Switch model 1995-L-6M-P-12A with reset to Preset & Motion Detect  L = Linear input Only  6M = Qty. 6, Mechanical Output Relays. Single Pole Double Throw, 10 AMP  P = Special Software. Adds Multiprogram Speed Offset and Time Based Outputs to the Standard Software  12A = NEMA 12 Enclosure for the programmer only	-	0	0.00	3,507.84
AME-1995-L-6M-P-X	Ametek Parts	Ametek Gemco Micro-Set Programmable Limit Switch  Model 1995L-6M-P-X   1995L Micro-set PLS Programmer with Reset & Motion Detect  For Linear Input ONLY  6M = Qty 6, Mechanical Output Relays, SPDT 10 AMP  P = Special Software with Multiprogram Speed Offset  and Time Based Outputs to standard software features  X = Open chassis style for panel mount, no enclosure is to be supplied  (7LBS) H 8" L 18" W 12" Box	-	0	0.00	3,557.52
AME-1995-L-6M-X-12A	Ametek Parts	Ametek Gemco Micro Set Programmable Limit Switch model 1995-L-6M-X-12A with reset to Preset & Motion Detect  L = Linear input Only  6M = Qty. 6, Mechanical Output Relays. Single Pole Double Throw, 10 AMP  X = Standard Software  12A = NEMA 12 Enclosure for the programmer only	-	0	0.00	2,948.40
AME-1995-L-6M-X-X	Ametek Parts	Ametek Gemco Micro Set Programmable Limit Switch 1995L  Part 1995-L-6M-X-X  1995L6MXX  Micro Set Programmable Limit Switch with Reset to Preset & Motion Detect  L = Linear Distance Transducer input Only  6M = Mechanical Output Relays  SPDT / Single Pole Double Throw, 10 AMP  X = Standard Software  X = Open Chassis - No Enclosure  Ships in 6 Weeks, Peck MI  Dated 01-2023  (7LBS) H 8" L 18" W 12" Box	-	0	0.00	3,877.00
AME-1996C-RSA-12	Ametek Parts	Ametek Gemco Ram-Set Press Shut Height Control. Ram-Set Controller with Output Board, Standard Software and Binary Output. The Ram-Set allows you to automate the shut height adjustment process. Consistently Set Shut Height to + or - .002 Inches. Stores up to 500 Die Numbers and Shut Height Values. For use on single or double action presses  RSA = RS485 Communcation  12 = NEMA 12 Rated Enclosure	-	0	0.00	4,651.55
AME-1996C-RSA-X	Ametek Parts	Ametek Gemco Ram-Set Press Shut Height Control. Ram-Set Controller with Output Board, Standard Software and Binary Output. The Ram-Set allows you to automate the shut height adjustment process. Consistently Set Shut Height to + or - .002 Inches. Stores up to 500 Die Numbers and Shut Height Values. For use on single or double action presses  RSA = RS485 Communication  X = No enclosure. Optional for a NEMA 12 Enclosure at additional cost	-	0	0.00	4,350.23
AME-1996C-X-12	Ametek Parts	Ametek Gemco Ram-Set Press Shut Height Control. Ram-Set Controller with Output Board, Standard Software and Binary Output. The Ram-Set allows you to automate the shut height adjustment process. Consistently Set Shut Height to + or - .002 Inches. Stores up to 500 Die Numbers and Shut Height Values. For use on single or double action presses  X = No RS485 Communication  12 = NEMA 12 Rated Enclosure	-	0	0.00	4,412.87
AME-1996C-X-X	Ametek Parts	Ametek Gemco Ram-Set Press Shut Height Control. Ram-Set Controller with Output Board, Standard Software and Binary Output. X = no options or enclosure. The Ram-Set allows you to automate the shut height adjustment process. Consistently Set Shut Height to + or - .002 Inches. Stores up to 500 Die Numbers and Shut Height Values. For use on single or double action presses.	-	0	0.00	4,203.35
AME-1996-M	Ametek Parts	Ametek Gemco OBSOLETE see 1996-C-X-X	-	0	0.00	Call	N/A
AME-1997-1404	Ametek Parts	Ametek Gemco Gate Hoist Rotating Cam Limit Switch	-	0	0.00	Call	N/A
AME-1997-1420	Ametek Parts	Ametek Gemco Gate Hoist Cam Limit Switch	-	0	0.00	Call	N/A
AME-1997-1447	Ametek Parts	Ametek Gemco Gate Hoist Cam Box. 4 Circuit. Right End Input Shaft	-	0	0.00	Call	N/A
AME-1997-1448	Ametek Parts	Ametek Gemco Gate Hoist Cam Box. 4 Circuit. Left End Input Shaft	-	0	0.00	Call	N/A
AME-1997-1552	Ametek Parts	Ametek Gemco Gate Hoist Cam Limit Switch  1997 Series is Designed to meet the US Army Corps of Engineers Specifications for Dam & Tainter Gate Control  6 Independent Circuits with SPDT Switches with Plunger Boots  6 Inch Diameter Metal Cams 50/1 Internal Gear Reducer  Heater & Thermostat to prevent condensation, 100 Watt  Internal AMCI Series DC-25 Encoder. Analog output rotary sensor with a 4-20 mA output. This sensor will be driven from the main camshaft with a 1 to 1 ratio  Includes all necessary internal sprockets, Chains & gears to rotate the main cam shaft approximately 350 degrees for full travel of the gate  NEMA 4X 304 Stainless Steel Enclosure  11/15	-	0	0.00	12,905.98
AME-1997-1567	Ametek Parts	Ametek Gemco 1997 Gate Hoist Cam Limit Switch, a specially engineered part number will be assigned at the time of any order  10 Independent Circuit / Switches / Cams  SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 4 screw terminals per switch with Boots on the Switch Plunger for additional Dust & Moisture Protection  Metal Cams that are Adjustable for both Timing and Dwell, 4 Degrees through 356 Degrees  304 Stainless Steel NEMA 4 Enclosure, Painted per Corps of Engineers Specifications. Latches, Bearing Flanges & Flange Bolts will also be Stainless Steel   A Thermostatically Controlled Enclosure Heater to control condensation  The necessary Internal Sprocket and Gear Reducer Drive to Rotate the Main Camshaft approximately 350 Degrees for the Full Travel of the Gate  About 120 LBS Ea	-	0	0.00	Call	N/A
AME-1997-1569	Ametek Parts	Ametek Gemco 1997-1569  Complete Gate Hoist package consisting of the following  10 Circuit , all metal aluminum Cams @ 6 Inch Diameter that are adjustable from 4 degrees through 356 degrees.  10 SPDT electrical switches with Rubber Boots on the plunger.  Switches provide one NO and one NC contact along with separate common terminals  Switches are UL Listed and rated  1 Incremental Control Assembly with SPDT Electrical Switches and Rubber Plunger Boots  These incremental cams will be set to activate every 18" of the gate travel  Includes Internal Heater and Thermostat  NEMA 4x / 304 Stainless Steel Enclosure and Outer Hardware  All necessary internal sprockets and gearing to drive the cams approximately 350 degrees for the entire gate travel. Also includes gearing for the incremental cam assembly as described above 1/14	-	0	0.00	12,969.70
AME-1997-1572	Ametek Parts	Ametek Gemco Gate Hoist Cam Limit Switch 1997  Specially Engineered Part 1997-1572  1997 Series is Designed to meet the US Army Corps of Engineers Specifications  For Dam & Tainter Gate Control  6 Independent Circuits - Cams - Switches  D.P.D.T. Snap Switches  With Rubber Plunger Boots for additional protection from Dust & Moisture  6 Inch Diameter Metal Cams  Internal Gear Reducer with a 50 to 1 Ratio  Right Hand shaft Extension  Heater & Thermostat to prevent condensation, 100 Watt  Internal Mounted AMCI Series DC-25 Encoder  Analog output rotary sensor with a 4-20 mA output  This sensor will be driven from the main camshaft with a 1 to 1 ratio  Includes all necessary internal sprockets, Chains & gears   To rotate the main cam shaft approximately 350 degrees for full travel of the gate  NEMA 4X Enclosure, 304 Stainless Steel Enclosure, Shaft etc,   Color Gray Powder Coat Finish  Ships in 15 to 16 Weeks, Peck MI  Dated 09-2020	-	12	0.00	13,252.68
AME-1997-1573	Ametek Parts	Specially Engineered 1980 Rotating Cam Limit Switch  NEMA 4 X Stainless Steel Enclosure includes the Cover, Latches, Bearing Flanges, & Flange Bolts from 304 Stainless Steel. The 3/4 Inch Diameter Main / Input Shaft is 316 Stainless  This construction meets a NEMA 4X Rating  6 Circuits / Labeled  DPDT Switches  Larger 6 Inch Diameter Aluminum Cams  1 to 1 Die Cast Painted Aluminum Right Angle Gear Box  Drain Plug & Breather	-	0	0.00	13,472.86
AME-1997-1580	Ametek Parts	Ametek Gemco Cam Limit Switch 1997  Part 1997-1580  GATE HOIST RCLS 6 CIR DPDT W/BOOT 104:1 INT GEAR   REDUCER 6" METAL CAMS AMCI DC25 ENCODER TO   TERM BLOCK CUSTOM N4 ENCLOSURE HEATER AND   T-STAT   Dated 01-2021	-	0	0.00	12,590.05

Prices are subject to change without notice. Last updated: 15-Aug-2025 06:59:45 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.