Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,171 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,413 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 923 part numbers: Electrical Control Products   HUBBELL 8,272 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48171 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   186  187  188  189  190  191  192  193  194  195  196  197  198  199  200  201  202  203  204  205  206
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-1980-111-R-SP-TD2	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch Model 1980-111-R-SP-TD2  Series 1980  1 = NEMA 1 Enclosure  11= 11 Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD2 = Timing Dial Labeled for C.C.W. Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	3,707.00
AME-1980-111-R-SP-X	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch Model 1980-111-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Steel Fabricated Enclosure  11 = 11 Independent Circuits / Cams / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	3,410.00
AME-1980-111-X-SP-TD2-R-30-R1	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-X-SP-TD2-R-30-R1  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  30 - Right Angle Gear Reducer ratio 30:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	4,944.00
AME-1980-112-D-DP-X	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-D-DP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	4,436.00
AME-1980-112-D-SP-TD4	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-D-SP-TD4  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	4,109.00
AME-1980-112-D-SP-X	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-D-SP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	3,812.00
AME-1980-112-L-DP-X	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-L-DP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	4,349.00
AME-1980-112-L-SP-X	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch Model 1980-112-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	3,725.00
AME-1980-112-R-DP-X	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-R-DP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	4,349.00
AME-1980-112-R-SP-TD1	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch Model 1980-112-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (29LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	4,022.00
AME-1980-112-R-SP-TD2	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-R-SP-TD2  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	4,022.00
AME-1980-112-R-SP-X	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-112-R-SP-X  1980112RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuits.  4 screw terminals per switch  X = No other options  3 Year Limited Warranty  Ships in 2 to 3 Weeks, Peck MI  Dated 01-2024	-	0	0.00	3,725.00
AME-1980-112-X-DP-X-R-6-R8	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-DP-X-R-6-R8  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	5,586.00
AME-1980-112-X-SP-R-X-R-1.5-R1	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-R-X-R-1.5-R1  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1.5 - Right Angle Gear Reducer ratio 1.5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	5,154.00
AME-1980-112-X-SP-R-X-S-6-R	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-R-X-S-6-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  R = Rubber Boot / Seal on the Switch Plunger for additional moisture or dust protection   X = No Timing Dial  S= Straight Drive Gear Reducer  6 = 6 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	5,368.00
AME-1980-112-X-SP-X-R-10-R4	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R10-R4  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure, Dust Tight  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  R4 = Right End Gear Reducer Shaft Location 4  (14LBS) H 8" L 18" W 12"  [Amazon]	-	0	0.00	3,506.76
AME-1980-112-X-SP-X-R-1-L1	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R-1-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial is to be provided  R= right Angle Gear Reducer  1 = 1 to 1 Gear Ratio  L1 = Left End Shaft Location, Position 1  (36LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]	-	0	0.00	3,506.76
AME-1980-112-X-SP-X-R-5-L1	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R-5-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial is to be provided  R= right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L1 = Left End Shaft Location, Position 1  (36LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]	-	0	0.00	3,506.76
AME-1980-112-X-SP-X-R-5-L7	Ametek Parts	Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-R-5-L7  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	0	0.00	4,962.00
AME-1980-112-X-SP-X-R-5-R7	Ametek Parts	Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R-5-R7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure, Dust Tight  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  R7 = Right End Gear Reducer Shaft Location 7 / Top of Gear Box / Left Side End View  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018]	-	1	0.00	4,962.00

Prices are subject to change without notice. Last updated: 13-Aug-2025 06:54:02 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.