Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48186 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   1070  1071  1072  1073  1074  1075  1076  1077  1078  1079  1080  1081  1082  1083  1084  1085  1086  1087  1088  1089  1090
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
GRD-55-4E-4SP-WR-80-LD	Gleason Reel Parts	Gleason Hubbell Geared Rotary Limit Switch 55  Part 55-4E-4SP-WR-80LD  554E4SPWR80LD  aka GR62652803  Long Dwell Cams  Right Hand shaft  Gear ratio 80 to 1  Contact Blocks 4  Circuits 4 N.O. - 4 N.C. Circuits  Switch Type S.P.D.T. - Single Pole double Throw  NEMA 4 Enclosure, Water Resistant  Turns of Drive Shaft to Trip Contacts:  Maximum, 68  Minimum 1.5  Overtravel 12  Reset: 0.75  Contact Block Specifications:  15 Amp 120, 240, 480 or 600 Volt AC  1/2 H.P. 120 Volt AC  1.0 H.P. 240 Volt AC  0.8 Amp 115 Volt DC  0.4 Amp 230 Volt DC  Pilot Duty 600 Volt AC Maximum  Features:  High strength Steel Shaft with Keyway, Through Hole & Set Screw Dimple  Conduit Connection Tapped for 1" NPT  Ships in 5 Days  Dated 1-2020  (6LBS) H 4" L 8" W 5" Box	-	0	0.00	1,631.89
GRD-55-7E-2DP-WB-111	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WB-111  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2  111 = 111 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection  Die Cast Enclosure  aka GR62673214  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,494.69
GRD-55-7E-2DP-WB-20	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WB-20  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2  20 = 20 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection  Die Cast Enclosure  aka GR62673211  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,494.69
GRD-55-7E-2DP-WB-222	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WB-222  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2  222 = 222 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection  Die Cast Enclosure  aka GR62673215  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,594.56
GRD-55-7E-2DP-WB-333	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WB-333  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2  333 = 333 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection  Die Cast Enclosure  aka GR62673216  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,594.56
GRD-55-7E-2DP-WB-40	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WB-40  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2  40 = 40 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection  Die Cast Enclosure  aka GR62673212  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,494.69
GRD-55-7E-2DP-WB-444	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WB-444  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2  444 = 444 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection  Die Cast Enclosure  aka GR62673217  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,761.03
GRD-55-7E-2DP-WB-640	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WB-640  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2  640 = 640 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62673218  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,761.03
GRD-55-7E-2DP-WB-80	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WB-80  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2  80 = 80 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62673213  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,494.69
GRD-55-7E-2DP-WL-111	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WL-111  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WL = Left Hand Shaft Extension from the enclosure  111 = 111 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672314  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,243.19
GRD-55-7E-2DP-WL-20	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WL-20  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WL = Left Hand Shaft Extension from the enclosure  20 = 20 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672311  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,243.19
GRD-55-7E-2DP-WL-222	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WL-222  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WL = Left Hand Shaft Extension from the enclosure  222 = 222 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672315  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,410.09
GRD-55-7E-2DP-WL-333	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WL-333  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WL = Left Hand Shaft Extension from the enclosure  333 = 333 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672316  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,410.09
GRD-55-7E-2DP-WL-40	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WL-40  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WL = Left Hand Shaft Extension from the enclosure  40 = 40 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672312  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,243.19
GRD-55-7E-2DP-WL-444	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WL-444  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WL = Left Hand Shaft Extension from the enclosure  444 = 444 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672317  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,576.54
GRD-55-7E-2DP-WL-640	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WL-640  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WL = Left Hand Shaft Extension from the enclosure  640 = 640 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672318  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,576.54
GRD-55-7E-2DP-WL-80	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WL-80  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WL = Left Hand Shaft Extension from the enclosure  80 = 80 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672313  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,243.19
GRD-55-7E-2DP-WR-111	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  Part 55-7E-2DP-WR-111  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WR = Right Hand Shaft Extension from the enclosure  111 = 111 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672014  [Ships in 1 Week]  [Updated 1-18]  (14LBS) H 6" L 8" W 6" Box	-	0	0.00	3,243.19
GRD-55-7E-2DP-WR-20	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WR-20  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WR = Right Hand Shaft Extension from the enclosure  20 = 20 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672011  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,243.19
GRD-55-7E-2DP-WR-222	Gleason Reel Parts	Gleason Hubbell Rotary Limit Switch  NEMA 7 Geared Rotary Limit Switch  GRD-55-7E-2DP-WR-222  55 = 55 Series Mounting and Shaft Location allows direct replacement of  GE Series CR115 switches  7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7  Class I Groups C & D and Class II Groups E, F & G  2 = 2 Independent Switches/ Circuits/ Cams  DP = DPDT Switches. Single Pole Double Throw Switches  These snap switches are switches are UL Recognized and CSA listed  WR = Right Hand Shaft Extension from the enclosure  222 = 222 to 1 Gear Ratio  1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection  Die Cast Enclosure  aka GR62672015  (14LBS) H 6" L 8" W 6"	-	0	0.00	3,410.09

Prices are subject to change without notice. Last updated: 19-Aug-2025 06:51:06 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.