Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.RenoldDirect.com	Email: sales@RenoldDirect.com	Phone: (888) 861-8777

 

RenoldDirect Online Order

Database Lookup:     By Part Number By Description
Total 48186 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   1003  1004  1005  1006  1007  1008  1009  1010  1011  1012  1013  1014  1015  1016  1017  1018  1019  1020  1021  1022  1023
Part Number	Product Category	Description	Description	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
GEC-CR115B22	Brake Parts	General Electric Switch  Limit Switch, Snap Acting  Part GEC-CR115B22  1 NO  600 Volt Maximum  UPC 078316629643  Mfg USA  (1LBS) H 4.00" L 5.00" W 4.00"  [Amazon]	-	0	0.00	50.00
GEC-CR115B4	Brake Parts	General Electric Switch  Precision Snap Limit Switch	-	0	0.00	81.25
GEC-CR115E121101	Brake Parts	General Electric Geared Rotary Limit Switch  Part CR115E121101  CR115 = Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Circuits, Switches, Cams  1 = 20 to 1 Gear Ratio  1 - S.P.D.T. Switches, Single Pole Double Throw  Can be wired for N.O. or N.C. Circuits  0 = Right Hand Shaft Extension from Enclosure  1 = Plain Shaft no keyway  3/4 NPT Pipe Tap for the Electrical Entrance  Dated 8/18  (6LBS) H 5" L 7" W 7" Box	-	0	0.00	706.25
GEC-CR115E121102	Brake Parts	General Electric Geared Rotary Limit Switch  Part CR115E121102  CR115 = Series 15  E1 = NEMA 1 & 12 Enclosure  2 = 2 Circuit, Switches, Cams  1 = 20 to 1 Gear Ratio  1 - S.P.D.T. Switches, Single Pole Double Throw  0 = Right Hand Shaft Extension  2 = Shaft with key & keyway  Maximum Turns to operate a switch 75  Minimum Turns to operate a switch 3  Overtravel 2  Turns to reset 1  AC or DC Pilot Duty Only  Dated   (6LBS) H 5" L 7" W 7"	-	1	0.00	800.00
GEC-CR115E121111	Brake Parts	General Electric Geared Rotary Limit Switch CR115  Part CR115 E1 21111  CR115E12111  Model CR1 Series 15   E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  1 = 20 to 1 Gear Ratio  1 = Single Pole Double Throw Switches  That can be wired for Normally Open or Closed Circuits  1 = Left Hand Shaft Extension from Enclosure  1 = Stainless Steel Input Shaft no keyway  3/4 NPT Pipe Tap for Electrical Entrance  Ships in 5 Days, OH  Dated 06-2025	-	2	0.00	1,210.60
GEC-CR115E121112	Brake Parts	General Electric Geared Rotary Limit Switch Part # CR115 E1 21112  Model CR1 Series 15   E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  1 = 20 to 1 Gear Ratio  1 = Single Pole Double Throw Switches that can be wired for Normally Open or Closed Circuits  1 = Left Hand Shaft Extension from Enclosure  2 = Woodruff Key & Keyway on the Stainless Steel Input Shaft	-	0	0.00	706.25
GEC-CR115E122101	Brake Parts	General Electric Geared Rotary Limit Switch Part # CR115 E1 22101  Model CR1 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  2 = 40 to 1 Gear Ratio  1 = Single Pole Double Throw Switches that can be wired for Normally Open or Closed Circuits  0 = Right Hand Shaft Extension from Enclosure  1 = Plain Shaft Extends 1 & 1/2 Inch from enclosure  Stainless Steel Input Shaft  3/4 NPT Pipe Tap for the El	-	0	0.00	Call	N/A
GEC-CR115E122102	Brake Parts	General Electric Geared Rotary Limit Switch  Part CR115E122102  Model CR15 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  2 = 40 to 1 Gear Ratio  1 = Single Pole Double Throw Switches  Can be wired for N.O. or N.C. Circuits  0 = Right Hand Shaft Extension from Enclosure  2 = Keyway & # 404 Woodruff Key Steel Main Shaft  # 3 Woodruff Key & Keyway Slot   3/4 NPT Pipe Tap for the Electrical Entrance  Normally a Stock Item @ BPI  Ships from Stock 2 3 Weeks  Dated 01-2022  (4LBS) H 4" L 7" W 5" Box	-	14	0.00	685.00
GEC-CR115E122109AD	Brake Parts	General Electric Geared Rotary Limit Switch Part # CR115 E1 22109AD  Model CR1 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  2 = 40 to 1 Gear Ratio  1 = Single Pole Double Throw Switches that can be wired for Normally Open or Closed Circuits  0 = Right Hand Shaft Extension from Enclosure  9 = Shaft  AD =   3/4 NPT Pipe Tap for the Electrical Entrance  (4LBS)	-	0	0.00	996.88
GEC-CR115E122111	Brake Parts	General Electric Geared Rotary Limit Switch  Part CR115E122111  CR115 = Series 15  E1 = NEMA 1 & 12 Enclosure  2 = 2 Circuit, Switches, Cams  2 = 40 to 1 Gear Ratio  1 - S.P.D.T. Switches, Single Pole Double Throw  1 = Left Hand Shaft Extension  1 = Plain Shaft, no keyway  Dated   (6LBS) H 5" L 5" W 5" Box	-	2	0.00	800.00
GEC-CR115E122122	Brake Parts	General Electric Geared Rotary Limit Switch Part # CR115 E1 22122  Model CR1 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  2 = 40 to 1 Gear Ratio  1 = Single Pole Double Throw Switches that can be wired for Normally Open or Closed Circuits  2 = Double Shaft / Shaft Extends from both Left & Right Side of the Enclosure  2 = Keyway & # 404 Woodruff Key Stainless Steel Main Shaft  3/4 NPT Pipe Tap f	-	0	0.00	Call	N/A
GEC-CR115E122402	Brake Parts	General Electric Switch  Part GEC-CR115E122402  CR115 E1 22402  General Electric Series 15 Rotary Limit Switch  NEMA 1 Die Cast Enclosure  2 Independent Switches / Circuits / Cams  111 to 1 Gear Ratio  D.P.D.T. Double Pole Double Throw Switches  The switches are U.L. & CSA Listed  Left Hand Shaft Extension  Plain Shaft End  3/4 NPT Pipe Tap for electrical connection  Stainless steel input shaft  aka ES15-4241  (6LBS)	-	0	0.00	Call	N/A
GEC-CR115E123101	Brake Parts	General Electric Geared Rotary Limit Switch CR115  Part CR115E123101  Model CR1 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  3 = 80 to 1 Gear Ratio  1 = Single Pole Double Throw Switches  That can be wired for N.O. or N.C. Circuits  0 = Right Hand Shaft Extension from Enclosure  1 = Plain Shaft Extends 1 & 1/2 Inch from enclosure  Stainless Steel Input Shaft  3/4 NPT Pipe Tap for the Electrical Entrance  Ships from Stock to 6 Weeks  Dated 01-2024  (4LBS)	-	1	0.00	966.11
GEC-CR115E123102	Brake Parts	General Electric Geared Rotary Limit Switch Part # CR115 E1 123102  Model CR1 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  3 = 80 to 1 Gear Ratio  1 = Single Pole Double Throw Switches that can be wired for Normally Open or Closed Circuits  0 = Right Hand Shaft Extension from Enclosure  2 = 2 = 1/2 Dia Shaft with #3 Woodruff Key & Keyway. Shaft Extends 1 & 1/2 Inch from enclosure  Stainless St	-	0	0.00	687.50
GEC-CR115E123111	Brake Parts	General Electric Geared Rotary Limit Switch  Part GEC-CR115E123111  Model CR1 Series 15  E1 = NEMA 1 & 12 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  3 = 80 to 1 Gear Ratio  1 = Single Pole Double Throw Switches that can be wired for Normally Open or Closed Circuits  1 = Left Hand Shaft Extension from Enclosure  1 = Plain Shaft. Shaft Extends 1 & 1/2 Inch from enclosure  Stainless Steel Input Shaft  3/4 NPT Pipe Ta	-	0	0.00	706.25
GEC-CR115E123112	Brake Parts	General Electric Geared Rotary Limit Switch  Part CR115E123112  Model CR1 Series 15  E1 = NEMA 1 & 12 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  3 = 80 to 1 Gear Ratio  1 = Single Pole Double Throw Switches  Can be wired for N.O. or N.C. Circuits  1 = Left Hand Shaft Extension from Enclosure  2 = Shaft Extends 1 & 1/2 Inch from enclosure with a woodruff keyway  Stainless Steel Input Shaft  3/4 NPT Pipe Tap for the	-	0	0.00	831.25
GEC-CR115E124101	Brake Parts	General Electric Geared Rotary Limit Switch  Part CR115E124101  Model CR1 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  4 = 111 to 1 Gear Ratio  1 = Single Pole Double Throw Switches  Can be wired for N.O. or N.C. Circuits  0 = Right Hand Shaft Extension from Enclosure  1 = Plain Steel Main Shaft  3/4 NPT Pipe Tap for the Electrical Entrance  Ships from Stock to 1 Weeks  Dated 05-2021  (4LB	-	0	0.00	993.44
GEC-CR115E124102	Brake Parts	General Electric Geared Rotary Limit Switch  Part CR115E124102  Model CR1 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  4 = 111 to 1 Gear Ratio  1 = Single Pole Double Throw Switches that can be wired for Normally Open or Closed Circuits  0 = Right Hand Shaft Extension from Enclosure  2 = 1/2 Dia Shaft with #3 Woodruff Key & Keyway  Stainless Steel Input Shaft  3/4 NPT Pipe Tap for the Electrica	-	0	0.00	943.75
GEC-CR115E124109AD	Brake Parts	General Electric Geared Rotary Limit Switch  Part CR115E124109AD  Model CR1 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  4 = 111 to 1 Gear Ratio  1 = Single Pole Double Throw Switches that can be wired for Normally Open or Closed Circuits  0 = Right Hand Shaft Extension from Enclosure  9 =   AD =   3/4 NPT Pipe Tap for the Electrical Entrance  Dated 8-19  Ships from Stock to 8 - 10 Weeks  (4L	-	0	0.00	1,038.75
GEC-CR115E125101	Brake Parts	General Electric Geared Rotary Limit Switch  Part CR115E125101  Model CR1 Series 15  E1 = NEMA 1 Die Cast Aluminum Enclosure  2 = 2 Switches / Circuits / Cams  5 = 222 to 1 Gear Ratio  1 = Single Pole Double Throw Switches  Can be wired for N.O. or N.C. Circuits  0 = Right Hand Shaft Extension from Enclosure  1 = Plain Stainless Steel Main Shaft  3/4 NPT Pipe Tap for the Electrical Entrance  Ships from MFG Stock  Dated 12-2023	-	0	0.00	1,019.39

Prices are subject to change without notice. Last updated: 18-Aug-2025 07:00:46 AM (EST)

Secure Online Order   Secure Online Order   408 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Renold part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Products     • Spider   • Spiderjaw and Spiderwrap   • Pinflex   • Crown Pin   • Tyreflex   • Discflex   • Chainflex   • Rigid   • Gearflex   • Renoldflex   • Hydrastart   • PM   • RB   • Universal Joint Assemblies   • Geared Mill Spindles   • Spiderflex

Pin and Bush Couplings Pin and Bush Couplings   The Pin and Bush coupling complements Ajax's line of standard gear type couplings. Hundreds of thousands have been applied on all types of direct connected industrial equipment resulting in long life with minimum maintenance.   Ajax Pin and Bush Flexible Couplings are usually applied on equipment when misalignment does not exceed +/- 1/2o.   Features: •   A fail safe design •   Cushions vibration & shock •   No lubrication is required •   Operates in any position

 

Full-Flex O-Ring Seal Couplings Full-Flex O-Ring Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid O-Ring Seal Couplings Flex-Rigid O-Ring Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor O-Ring Seal Couplings   Mill Motor O-Ring Seal Couplings   •   Standard mill motor couplings for A.I.S.E. tapered shaft mill motors. Used predominantly in the metal industry.

Standard Extended Shaft Gaps Standard Extended Shaft Gaps   Available as one hub reversed or both hubs reversed.

 

Full-Flex Metal Seal Couplings Full-Flex Metal Seal Couplings   •   Forged medium carbon steel •   Crowned and barreled teeth •   Tight-fitting high strength bolts •   Large lube reservoir •   Accepted worldwide

Flex-Rigid Metal Seal Couplings Flex-Rigid Metal Seal Couplings   •   Used in pairs with a shaft to connect widely separated equipment.

Mill Motor Metal Seal Couplings   Mill Motor Metal Seal Couplings   •   Full-flex or flex-rigid. •   Furnished with exposed bolts only.

Full-Flex Heavy Duty O-Ring Seal Couplings Full-Flex Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

 

Flex-Rigid Heavy Duty O-Ring Seal Couplings Flex-Rigid Heavy Duty O-Ring Seal Couplings   •   Material: forged medium carbon steel; heat treated alloy steel available as an option.

D Series Couplings - High Misalignment, Full-Flex D Series Couplings - High Misalignment, Full-Flex   •   D Series Full-Flex couplings accommodate offset, angular or combined misalignment.

D Series Couplings - High Misalignment, Flex-Rigid D Series Couplings - High Misalignment, Flex-Rigid   •   Universally used for pinch roll, shear drives and tension bridles on auxiliary rolling mill equipment.

DS Series Spindle Couplings DS Series Spindle Couplings   •   DS Series Spindle couplings are used where frequent vertical roll removal is required. They are also suitable for clustered applications such as levelers, tube mills, etc.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.